Public Lab Wiki documentation



sandbox-detecting-wastewater

1 | 8 | | #27603

This draft wiki page is a work in progress!


Wastewater is “used water” that’s created by households, cities, and industry. It ranges from sewage to surface runoff that can flow from roadways into storm drains. Untreated or under-treated wastewater can contain a variety of pollutants that can harm people and ecosystems when it’s released into the environment.

On this page, we’re collecting information on some of the clues that might indicate wastewater pollution in the environment, and ways to investigate them. Some methods assess general water quality conditions that can correlate with wastewater pollution, while other methods can more directly signal the presence of wastewater by identifying specific pollutants.


Detecting possible wastewater pollution

There’s lots of information (in English and Spanish) about what to look for in the comments of this question: What are some observable tell-tale signs of wastewater pollution?

If you’ve tried any of the approaches below to detect or document wastewater, please share your experiences and post a research note!



Change in water color or clarity

turbid wastewater in a stream

Cloudy looking stream water, Sustainable Sanitation Alliance, CC BY


METHODS:

Documenting visual changes in water color or clarity


NYC Flushing Bay CSO

Satellite image showing discolored, cloudy water in the Gowanus Canal. From this slideshow by @eymund.


Documenting changes in water color/clarity with spectral imagery (might not be visible to human eyes)

Gowanus plume

Visible and near-infrared photos composited to reveal a plume of flowing sewage scum, originally from this note by @liz.


Measuring turbidity of water

Solid particles floating throughout the water (called suspended solids) increase its turbidity. Learn more about turbidity in this research note from @anngneal.

Secchi diskSimple turbidity sensor

Left: Secchi disk for measuring turbidity, from this note by @anngneal. Right: Simple turbidity sensor prototype, from this note by wmacfarl.


Activities on turbidity


Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.



Odor

See this comment from @jesseslone about odors near wastewater discharge areas and what they might indicate.

METHODS

Methods and activities related to odor logging can be found here: https://publiclab.org/methods#odor

Activities on odor


Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.



Changes in water temperature

METHODS

Thermal fishing bob

Sense changes in water temperature and display temperature differences with colored lights in the field. Take a long-exposure photograph to record the results!

thermal fishing bob

A long-exposure photograph of colored lights on a thermal fishing bob towed in the Charles River, Boston. The different colors indicate differences in water temperature near a power plant, which releases heated wastewater into the river. From this note by @Sara.


Activities on thermal-fishing-bob


Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.


Thermal photography

Activities on thermal-photography


Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.



Conductivity

For example, salty wastewater (brine) associated with fracking can cause a spike in water conductivity (source: FracTracker).

Organic pollutants like oil, however, don’t generally conduct electricity well and may lower the conductivity of water.

“A failing sewage system would raise the conductivity because of the presence of chloride, phosphate, and nitrate; an oil spill would lower the conductivity.” - US EPA

METHODS

https://publiclab.org/methods#conductivity

Two examples:



Indicator chemicals or components

METHODS

Detecting optical brighteners


optical brighteners

UV light makes a tampon exposed to optical brighteners glow brightly. In the positive control on the right, the tampon was soaked in laundry detergent. From this note by @alejobonifacio.


Organic waste and oxygen

Certain bacteria help to clean water by breaking down organic wastes, and they use oxygen in the process. Measuring the amount of oxygen in water and how readily it might be used can help create a picture of how much organic waste is present and how well it’s breaking down.



DIY DO and ORP sensor

Do-it-yourself dissolved oxygen (DO) and oxidation-reduction potential (ORP) sensor for monitoring a small wastewater treatment system. From this note by @jesseslone.

There are also ways to use spectroscopy to detect organic matter (see below)


Bioindicators and bioassays

Using living things to help indicate or measure impacts from polluted water. Changes in the survival or growth of certain plants, animals, and microorganisms in water can indicate worsening water quality.

image here!

Activities on bioindicators


Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.


Spectrometry methods for wastewater: a grab bag

Lots of people at Public Lab are interested in spectrometry and have experience using spectrometers for environmental monitoring. We’re collecting some approaches for detecting various things related to wastewater here:

Some emerging research:

  • Fluorescence spectrometry for detecting distinct “signatures” of organic wastewater:

“Human wastewater has distinct optical properties that are different than those typically observed in natural waters” - pg. 8, Detection of Wastewater Contamination, the Water Environment Federation

Some preliminary results showing the fluorescence signals of sewage vs. surface water, from Using optical sensors to detect sewage contamination in the Great Lakes:

USGS fluorescence signals

Different fluorescence signals from sewage and stream samples measured using a laboratory-based instrument. Public domain image from this USGS project.

The Public Lab Oil Testing Kit uses fluorescence spectrometry to detect and identify oil pollution



Questions

Questions tagged with question:detecting-wastewater will appear here



Activities

Activities tagged with activity:detecting-wastewater will appear here


Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.


More resources and references