Follow related tags:
Gaurav! What a great post and we are indeed lucky! 😄
So, to clarify: what I'm saying is that there seem to mathematical artefacts in the calibrated in...
Also, 5 - Use 'absolute' measurement values when mathematically comparing amplitude of spectra --...
Ok, visualizing the spectra helps. 1 - The calibration (wavelength calibration using a CFL source...
Also, I didn't save any spectra with saturated channels that I recall, but the recent spectrum ht...
Ah, the table makes the values hard to see. Note for instance that a raw value of 10 scales to 7....
I can't edit the previous comment, I get an error when I try. This is what I wanted to post: ech...
I can confirm that this tuned activity LED on Pi Zero off: #echo none | sudo tee /sys/class/leds...
OK! Maybe it's possible to just disable LED via software: https://www.jeffgeerling.com/blogs/jef...
My experience is that blocking all the light from a LED indicator is a lot harder than you might ...
Hi @sagarpreet nice work. I think is better to leave the PM2.5 value because the AQI refers to a...
Hi @sagarpreet nice work. I think is better to leave the PM2.5 value because the AQI refers to a...
Hi @sagarpreet nice work. I think is better to leave the PM2.5 value because the AQI refers to a...
Hmm! Interesting point. I didn't think about the flashing LEDs! But thinking about this, it shoul...
Could not find the actual spectra from the info provided. How about an explicit link or post the ...
Great! Glad it worked out. We'd love to see how your project comes together, it looks like a real...
This is interesting. What unit is PM2.5 in? If it's ug/m3 then I think it's best to not change it...
Hi @bronwen. I initially asked a 'question', but then realised the commenting function was easier...
I wonder if @marlokeno, @nanocastro, @imvec, @xose, @zengirl2, @JamesWarren, @the_butler, @guoliv...
I used the formula given on the pic above 😀 . Now the heat map looks like this :
Thank you :)
See if that helps!
Note how we've put 2-3 pieces of sticky foam under the bottom edge of the camera in the pics @Bro...
Hm, this looks pretty good. Can you post a pic of the entire setup, including the lamp? I think u...
Hi @the_butler, welcome to Public Lab! I see you've tagged the MACA Open Air Quality Monitor proj...
The comment tries to answer questions above but some still need work: this is definitely a rel...
Here is a look at the set up. Maybe you all can tell if this is to far forward or up/down, or a ...
Here is a view of my split DVD bottom (clear) and my split DVD-R (purple)
Another open air image. I noticed that I can block the direct light to get a black background, a...
New edit by imvec 7 months ago - changes
New edit by jmacha about 1 year ago - changes
New edit by jmacha about 1 year ago - changes
New edit by jmacha about 1 year ago - changes
New edit by jmacha about 1 year ago - changes
New edit by jmacha about 1 year ago - changes
New edit by jmacha about 1 year ago - changes
New edit by jmacha about 1 year ago - changes
New edit by jmacha about 1 year ago - changes
New page by warren over 1 year ago
New page by laurel_mire over 1 year ago
New page by michelleiL almost 2 years ago
New page by JuliaGuerrein almost 2 years ago
New page by bhamster almost 2 years ago
New page by bhamster almost 2 years ago
New page by fongvania almost 2 years ago
New page by bhamster about 2 years ago
New page by bhamster about 2 years ago
New page by bhamster about 2 years ago
The easiest way to start with Public Lab community is to ask a question.
See others' questions and ask your own here:
Getting started exploring a local issue or concern?
warren commented on GSoC with Public Lab: First Evaluation almost 6 years ago
Looking forward to our next big challenge! :-)