Comments

Author Comment Last activity Moderation
warren "Hi, our basic microscope kits use a standard USB webcam that shouldn't need a driver; can you tell us more about the operating system you're using?..." | Read more » over 2 years ago
warren "Obviously we love to see any improved 3d printed parts and would love to add to the design. Just so people know, we try to print these to be solid,..." | Read more » over 2 years ago
warren "Sadie, just curious, how does your adhere to the board? I love the little grippy bits that hold the lens itself! " | Read more » over 2 years ago
warren "Kimchi w crystallized salt Dried Thai basil! " | Read more » over 2 years ago
warren "This went so well! Lots of people came by over the course of the night. I'll share photos gradually from each computer :smiley: Some red wine: ..." | Read more » over 2 years ago
warren "Oh awesome! " | Read more » about 3 years ago
warren "Oh sorry! I misunderstood! Here, i've added that too now, but note that I believe I just found a standard m12 on thingiverse and resized it. So the..." | Read more » about 3 years ago
warren "It's this one! https://github.com/publiclab/community-microscope/blob/master/lens-adapter.stl " | Read more » about 3 years ago
warren "Oh gosh, well it's not super nice, and i think we may literally just have crudely stretched them to make gcode, but, the original is here: https://..." | Read more » about 3 years ago
warren " This is great! Indeed, this is a good approach, although I found that not all computers could use an internet gadget either without drivers, it's ..." | Read more » about 3 years ago
warren "Although, "tell these apart" may also be a relative term. When you see the light or dark regions, you dont see the pits themselves but rather diffe..." | Read more » about 3 years ago
warren "And to answer a question above, I /think/ this would put all "long" pits in the 1 regions, and all "short" pits in the 0 regions. So, you'd have to..." | Read more » about 3 years ago
warren "Oh, actually this technique doesn't use a laser cutter - it forms an image by copying data onto the DVD at differing densities, so that the actual ..." | Read more » about 3 years ago
warren " Here's the 3d model for the adapter for the alternative "wider flange" webcams -- @Bronwen : https://github.com/publiclab/community-microscope/bl..." | Read more » over 3 years ago
warren ":-) good to know!!! We're looking for slightly better webcams now too. We found this one is pretty nice, and we are getting them for about $30, al..." | Read more » over 3 years ago
warren "Hi! It's this one or one very like it! Awesome! " | Read more » over 3 years ago
warren "Final note as we prepare a new activity for Raspberry Pi kits: you need to remove the lens from the Pi camera, which is a bit tough. We've loosened..." | Read more » over 3 years ago
warren "I updated this with a new photo of the improved webcams, which means you can skip the inner foam tape step since the circuit board can unscrew and ..." | Read more » over 3 years ago
warren "Here is the adapter! We're making some on a lasercutter and some on a 3d printer, but it's a /very/ simple part -- the tough part for us is getting..." | Read more » almost 4 years ago
warren "For folks starting to connect microscope objective lenses to their microscopes as part of the Community Microscope Kit, we'll post some photos soon..." | Read more » almost 4 years ago
warren "@jiteovien just linking your diagram and challenge up with this reply from @maxliboiron -- https://publiclab.org/questions/jiteovien/08-08-2018/can..." | Read more » almost 4 years ago
warren " " | Read more » almost 4 years ago
warren " " | Read more » almost 4 years ago
warren "Glad to hear it. I've noted that not all WiFi networks work, and sometimes trying on a different one (like the one I broadcast from my phone) works..." | Read more » almost 4 years ago