Using Crenova trail cam time lapse photos to get visual of adjacent industrial sand mine (~250 meters west of this stream/wetland zone) sedimentation discharge. Camera is posted at one end of a 4' diameter culvert. Planning to add Riffle monitor at this site to detail stream turbidity, conductivity, depth and temperature.
10 Comments
This looks great, thank you for sharing! How long has it been out there, and do you have a sense of the battery life? How often are you shooting?
We're collecting documentation on setup here: https://publiclab.org/wiki/timelapse -- any chance you've taken some snaps of how you set it up and pointed it?
Thank you!
Is this a question? Click here to post it to the Questions page.
Reply to this comment...
Log in to comment
Following an initial brief posting in early December (cold snap conditions), I re-posted the camera the third week in February attempting to precede warm-ups and snow-melt runoff events.
Since I've set-up a single daily time lapse photo format, I'd anticipate a 4 month battery shelf life.
I'll provide set-up photos along with additional stream/wetland photos this weekend.
Thanks for the interest -- additional feedback is most welcome!
Reply to this comment...
Log in to comment
That's great to hear, thanks. 4 months would indeed be great.
Just came across this -- blasting caught on timelapse at a mountaintop removal site by @LauraChipley:
https://publiclab.org/notes/LauraChipley/09-18-2015/hacking-trail-cameras-to-document-blasts-on-mountaintop-removal-sites#c16250
Pretty impressive what you can catch!
Reply to this comment...
Log in to comment
Wow! looks like you have a great spot for the camera! Thanks for posting
Reply to this comment...
Log in to comment
Thanks Warren. Blasting events resonate landscape and concern!
Reply to this comment...
Log in to comment
Hi Dwight! Have you tried to up the photos taken per day? catch anything interesting?
Is this a question? Click here to post it to the Questions page.
Reply to this comment...
Log in to comment
Hi Stevie,
I'll attach some recent sedimentation examples. We've experienced heavy rain fall and flooding this month which caused moisture damage to the trail cam (last week). I've pulled the unit, and ordered a new camera to replace the water damaged unit. I intend to donate the new camera, and will ship the damaged one back to you for insurance claim purposes.
Best regards,
Dwight
Reply to this comment...
Log in to comment
Hi Dwight, wow sorry to hear it was damaged -maybe we should look into a different type of camera @warren . Would have been great to catch some of that runoff footage! That's what Lee was able to use in the past talking to the county. Great pictures here though @gretchen check these out.
Reply to this comment...
Log in to comment
Wow yeah, i'd thought it was waterproof, but it's good to know (although too bad!) that heavy rains can damage it. Do you think it got submerged at some point?
Is this a question? Click here to post it to the Questions page.
Reply to this comment...
Log in to comment
The lower seal of the camera encasement did get ~24 hours of prolonged exposure (partial submersion) to elevated water volume during last week's heavy rainfall. This caused water to get into the unit, and also trashed the latest set of photos on the SD. I had previously angled the unit to get better close-ups of the sedimentation loads. This naturally
brought the camera into closer stream surface proximity -- apparently too close given the recent flood water.
This trail camera is waterproof under normal circumstances. In hindsight, I would have pulled the unit just prior the last storm to prevent damage.
Reply to this comment...
Log in to comment
Login to comment.