Revisions for Foldable Spectrometry Starter Kit
| 41 | warren |
August 04, 2016 21:04
| over 7 years ago
New to spectrometry? You might like to try the Papercraft Spectrometry Starter Kit, a simple foldable paper spectrometer which you can attach to a smartphone or webcam. It’s made of paper to reduce cost and complexity, and is mainly intended as an “introductory” or educational kit. Specs / Statement of function / Purpose of design or deviceThe resolution and stability (ability to hold a wavelength calibration) of the spectrometer depend on how carefully you construct and store it. This kit is designed to be easy to assemble, and is not focused on extreme precision or super consistent measurements; it’s made of paper, and will crush if you put it in your pocket -- but it can be made out of easy-to-find materials and assembled in ~15 minutes. To improve it, see the related hardware mods. For a more rigid, robust device intended for more advanced work, check out the Desktop Spectrometry Starter Kit. Most digital cameras can record light in the visible range, ~400-700 nanometers, so this determines the range of your device. The resolution is mainly limited by the resolution of the camera (and it’s focus!) and by the narrowness of the slit -- but measurements should be possible at better than 3 nanometers per pixel. See limitations and goals for more. Plans, materials, and what it takes to make one:
Instructions
This starter kit includes these materials:
The kit uses, but does not include, a smartphone with a camera (or a webcam) to capture images of spectra through the spectrometer you construct. It works with free web software https://spectralworkbench.org. To scan things, you will probably also need a light source Limitations and GoalsThis starter kit is a great way to begin learning about spectroscopy by building a simple one, but is not meant for quantitative research. Once you’ve mastered it, you can improve it with some of the hardware mods listed here, or to take it to the next level, see the Desktop Spectrometry Starter Kit for a more robust platform to build on. Though it is specifically designed to be an “introductory” kit, there are a number of goals to work towards, and limitations which you can help to overcome in the current design. Intro-level kits play an important role in helping people build the skills they need to join in the project and improve these methods -- in building a large collaborative community around this project. Some of the goals and challenges we’re still working on with this kit include: [ these could be listed as “requested mods”? ]
Get involved in the next revisionOOH Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer. See also: Preparing a DVD-R to act as a diffraction grating for more information on the optional removal of the residual aluminium and dye layers.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 40 | liz |
July 28, 2016 20:31
| over 7 years ago
New to spectrometry? You might like to try the Papercraft Spectrometry Starter Kit, a $10 foldable spectrometer which you can attach to a smartphone or webcam. It’s made of paper to reduce cost and complexity, and is mainly intended as an “introductory” or educational kit.
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
UpgradesThe foldable mini-spectrometer can be quite precise -- but it's delicate and it's not weatherproof. You can put it inside a more rigid box to protect it, or consider using some of the upgrades mentioned in the Desktop Spectrometry Kit upgrades section: http://publiclab.org/wiki/dsk#Upgrades Build your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer. See also: Preparing a DVD-R to act as a diffraction grating for more information on the optional removal of the residual aluminium and dye layers.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 39 | warren |
May 04, 2016 19:18
| almost 8 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. This page is being actively improved, so be sure to check back soon to see if more content has been added.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
UpgradesThe foldable mini-spectrometer can be quite precise -- but it's delicate and it's not weatherproof. You can put it inside a more rigid box to protect it, or consider using some of the upgrades mentioned in the Desktop Spectrometry Kit upgrades section: http://publiclab.org/wiki/dsk#Upgrades Build your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer. See also: Preparing a DVD-R to act as a diffraction grating for more information on the optional removal of the residual aluminium and dye layers.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 38 | warren |
January 22, 2015 20:57
| over 9 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. This page is being actively improved, so be sure to check back soon to see if more content has been added.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
UpgradesThe foldable mini-spectrometer can be quite precise -- but it's delicate and it's not weatherproof. You can put it inside a more rigid box to protect it, or consider using some of the upgrades mentioned in the Desktop Spectrometry Kit upgrades section: http://publiclab.org/wiki/dsk#Upgrades Build your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer. See also: Preparing a DVD-R to act as a diffraction grating for more information on the optional removal of the residual aluminium and dye layers.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 37 | warren |
November 16, 2014 17:34
| over 9 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. This page is being actively improved, so be sure to check back soon to see if more content has been added.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
UpgradesThe foldable mini-spectrometer can be quite precise -- but it's delicate and it's not weatherproof. You can put it inside a more rigid box to protect it, or consider using some of the upgrades mentioned in the Desktop Spectrometry Kit upgrades section: http://publiclab.org/wiki/dsk#Upgrades Build your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 36 | warren |
July 18, 2014 16:55
| almost 10 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. This page is being actively improved, so be sure to check back soon to see if more content has been added.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
Make your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 35 | warren |
June 12, 2014 18:55
| almost 10 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. This page is being actively improved, so be sure to check back soon to see if more content has been added.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
Make your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 34 | warren |
June 12, 2014 18:54
| almost 10 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. This page is being actively improved, so be sure to check back soon to see if more content has been added.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
Make your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 33 | warren |
July 29, 2013 12:27
| over 10 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. Buy one from our storeThis page is being actively improved, so be sure to check back soon to see if more content has been added.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
Make your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 32 | warren |
December 16, 2012 17:23
| over 11 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. Buy one from our storeThis page is being actively improved, so be sure to check back soon to see if more content has been added.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
Make your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 31 | warren |
December 16, 2012 16:19
| over 11 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. Buy one from our storeThis page is being actively improved, so be sure to check back soon to see if more content has been added.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
Make your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 30 | warren |
December 16, 2012 16:13
| over 11 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. Buy one from our storeThis page is being actively improved, so be sure to check back soon to see if more content has been added.
Using your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
Make your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 29 | warren |
December 16, 2012 16:13
| over 11 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. This page is being actively improved, so be sure to check back soon to see if more content has been added.
buy one from our storeUsing your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
Make your ownWhether or not you buy one on our store, you can follow these instructions to assemble your own Foldable Mini-Spectrometer: 8.5x11mini-spec3.8.pdf (550 kB)
Assembly PhotosCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 28 | warren |
December 16, 2012 16:10
| over 11 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. This page is being actively improved, so be sure to check back soon to see if more content has been added.
buy one from our storeUsing your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
Make your ownDownload 8.5" x 11" instructions
Photo Folding StepsCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 27 | warren |
December 16, 2012 16:07
| over 11 years ago
Welcome! This page includes full instructions to assembling the Public Lab Foldable Mini-Spectrometeter. This page is being actively improved, so be sure to check back soon to see if more content has been added.
buy one from our storeUsing your spectrometerOnce you've assembled your spectrometer and are ready to use it, plug it in and visit SpectralWorkbench.org to begin recording data with it. The web-based software works in the Chrome and Opera browsers with more coming soon. (Peer) SupportPublic Lab is not a corporation, we're an open community of DIY environmental science researchers which you have just joined! The best place to get help is the spectrometry mailing list; to join, register on this site and be sure to check the "plots-spectrometry" box. The spectrometry mailing list is made up of people like you, who are building and improving open source spectrometry techniques. Ask questions, look for help, and consider helping others too! Resources
Make your ownDownload 8.5" x 11" instructions
Photo Folding StepsCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Assembly GuideCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 26 | mathew |
December 16, 2012 08:46
| over 11 years ago
buy one from our storeHave a spectrometer already? Get started with SpectralworkbenchMake your ownDownload 8.5" x 11" instructions
Photo Folding StepsCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Now get started with Spectralworkbench Illustrated Folding StepsCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 25 | mathew |
December 16, 2012 08:45
| over 11 years ago
buy one from our storeHave a spectrometer already? Get started with SpectralworkbenchMake your ownDownload 8.5" x 11" instructions
Photo Folding StepsCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Glue or tape together. Start with the top flap and make sure the edges are aligned.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Illustrated Folding StepsCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 24 | mathew |
December 16, 2012 08:33
| over 11 years ago
buy one from our storeHave a spectrometer already? Get started with SpectralworkbenchMake your ownDownload 8.5" x 11" instructions
Photo Folding StepsIllustrated Folding StepsCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
get started with Spectralworkbench
|
Revert | |
| 23 | mathew |
December 16, 2012 07:57
| over 11 years ago
buy one from our storeHave a spectrometer already? Get started with SpectralworkbenchMake your ownDownload 8.5" x 11" instructions
Photo Folding StepsIllustrated Folding StepsCut out along the outer edge if not already cut out.
Fold as indicated by the lines. Thinly dotted lines are folded down, dashed lines folded up.
Except for the Diffraction grating on door, glue or tape all flaps down to the outside.
To make a diffraction grating from a DVD-R, cu a square from the outer edge. The DVD has is two layers of plastic. Peel back the reflective layer, and cut a small square out of the transparent layer.
Tape or glue down the DVD-R diffraction grating to the inside of the spectrometer so that the diffraction grating is vertical, producing a horizontal spectral rainbow. Then glue the door closed.
Attach The spectrometer to a webcam with the aid of a box, to a phone, or to a computer.
Now get started with Spectralworkbench |
Revert | |
| 22 | mathew |
December 16, 2012 07:35
| over 11 years ago
buy oneHave a spectrometer already? Get started with SpectralworkbenchMake your ownDownload 8.5" x 11" instructions
Photo Folding StepsIllustrated Folding Steps |
Revert |
