Public Lab Wiki documentation



Raspberry Pi Infragram

2 | 12 | | #15134

« Back to Infragram

This page collects research on using #raspberry-pi based cameras (aka #pi-camera) to take Infragram multispectral photos, for plant health analysis. It is supported in part by the AREN project at NASA.

Design goals

Low cost, low complexity, easy to build and open source!

Also see the Image Sequencer project which is designed to run on a Raspberry Pi for on-board image processing.

To get a kit with this already set up on an SD card and/or Raspberry Pi camera, see:

Quick start





If yours is already assembled, just plug it in using a Micro USB cable (or battery pack) and it'll create a WiFi network called 00-PiCamera -- password publiclab -- which you can log into from your phone or laptop. You'll quickly see streaming video, be able to take photos, timelapses, or videos, do motion triggered capture, and more.

Questions

Questions can be either frequently asked questions, or "next step" challenges we're looking to solve.

Title Author Updated Likes Comments
HELP! Cannot see any live video or take pictures. @JorgeHM over 3 years ago 11
What are easy and fast ways to get files off a Raspberry Pi? @warren over 5 years ago 3
I just gotten my newly purchased Infragram Pi Camera, my pi.local is blank and pi.local/Cam keeps popping up message "Error in RaspiMJPEG" hence I do not get any live video feed. Anyone can help? @willieong over 5 years ago 1
Camera module for Computer Vision/LED Plant Measurement System @SangHo almost 7 years ago 3
How can I can make a raspberry pi camera just with the filters process the crops and immediately produce the results to a computer or to other device, without having to use the website? @csteran almost 7 years ago 15
Add a filter on a Pi NoIR camera @fsxskillz almost 7 years ago 2
How do I trigger a photo on a Raspberry Pi camera using a button? @warren about 7 years ago 2
How can we set up a Raspberry Pi camera as an ethernet USB device to avoid using WiFi @warren about 7 years ago 5
How can we stream video to SpectralWorkbench.org or Infragram.org from a Raspberry Pi camera? @warren about 7 years ago 2
Can I use a Raspberry Pi with the Pi Noir camera to make NDVI images? @warren about 7 years ago 2
How do I set a custum white balance of the NoIR modulo cam? @LaPa about 9 years ago 25

Activities

Activities show how to use this project, step by step.

Purpose Category Status Author Time Difficulty Replications
How do I set a custum white balance of the NoIR modulo cam? - - @LaPa - - 0 replications: Try it »
TetraPi: a well characterized multispectral camera - - @khufkens - - 0 replications: Try it »
Raspberry + NoIR cam + Sensors to detect water stress of the plants during their growing - - @LaPa - - 0 replications: Try it »
Prepare an SD card for a Raspberry Pi camera from scratch - - @warren - - 1 replications: Try it »
Raspberry Pi Camera Rig - - @seankmcginnis - - 1 replications: Try it »
PiCamera filter mounting system. - - @wln215 - - 0 replications: Try it »
Setting up the Raspberry Pi Camera for Wireless Streaming - - @partsandcrafts - - 0 replications: Try it »
NDVI from PiNoir with a blue filter - - @carolccarvalho - - 0 replications: Try it »
Raspberry + NoIR cam + Blue filter - - @carolccarvalho - - 0 replications: Try it »
Removing a Raspberry Pi camera IR filter (learn from my mistakes) - - @mathew - - 0 replications: Try it »
Image Sequencer on Raspberry PI - - @tech4gt - - 0 replications: Try it »

Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.