| Author | Comment | Last activity | Moderation | ||
|---|---|---|---|---|---|
| warren | "They're the same as the older paper spectrometer templates, yeah! But cut down a little more to fit nicely. You can find the outline to print here:..." | Read more » | about 6 years ago | |||
| pdhixenbaugh | "Hello, thanks for your question! Hopefully it gets an answer soon. :) " | Read more » | about 6 years ago | |||
| xose | "Hi @zixaq I've done this before using Raspberry pi 2b and the original raspberry pi camera V2. What I've found is this: 1. Some people recommend to..." | Read more » | over 6 years ago | |||
| warren | "aha, I guess I'm wondering if it's possible to just tape over the red LED -- but in future versions we can integrate that setting for sure -- we'll..." | Read more » | over 6 years ago | |||
| zixaq | "There are a handful that all say the same thing when I search for "disable pi camera led": First up, we need to edit the config file. sudo nano /..." | Read more » | over 6 years ago | |||
| pdhixenbaugh | "Hey! Welcome to public Lab! Could you post the guide that you're following, and the config file in question? I'm not personally familiar with the ..." | Read more » | over 6 years ago | |||
| lach_myers | "HI @warren I did not try the Lego hack, as I had no details of what to do and I had the key on order. No pics as I had my hands fully occupied. I ..." | Read more » | over 6 years ago | |||
| warren | "Awesome :tada: did you find that the lego piece also worked? Obviously we have legos in the kits already :stuck_out_tongue: But if not, we can run..." | Read more » | over 6 years ago | |||
| lach_myers | "OP check in. The focus tool arrived - its very simple, easy to use and ... works. Quite effective. Before focus on left, after on right. The onl..." | Read more » | over 6 years ago | |||
| warren | "That's too bad - we can possibly start shipping keys with these if this affects everyone. A meter is pretty bad! We couldn't lengthen the case that..." | Read more » | over 6 years ago | |||
| lach_myers | "OP Focus tests completed, with and without grating, and both show out-of-focus problems at all distances from about 80mm to over a meter - which is..." | Read more » | over 6 years ago | |||
| lach_myers | "OP again. Mine is the standard (IR filtered) V2 camera, as I wasn't sure how the software would handle the non visible end. I've started investigat..." | Read more » | over 6 years ago | |||
| tejadal1 | "I bought one independently, though I do recommend that you offer that option. The stark contrast between the webcam's spectrum range and the NoIR R..." | Read more » | over 6 years ago | |||
| warren | "We don't by default but probably should list that option as we do stock them. Can you email kits@publiclab.org to place an order? " | Read more » | over 6 years ago | |||
| tejadal1 | "Hello! Nice work on the raspberry pi version of the spectrometer! A question, for @Warren , does PublicLabs provide the NoIR version of the Camera..." | Read more » | over 6 years ago | |||
| warren | "I think you can use a very fine pair of tweezers to slightly rotate the Pi Camera lens for a focus change. Do post if that works for you! But yes, ..." | Read more » | over 6 years ago | |||
| warren | "This is the best. Thanks for posting, and great documentation!!! :tada: :grinning: :+1: " | Read more » | over 6 years ago | |||
| rmaltzman | "I didn't but I wish I had. I would suggest creating a template for an 'inner sleeve' or something of that sort which could be made with dark paper..." | Read more » | almost 7 years ago | |||
| warren | "That's so great! Did you darken the interior or use thicker paper? Any suggestions on improving the instructions? " | Read more » | almost 7 years ago |