| Author | Comment | Last activity | Moderation | ||
|---|---|---|---|---|---|
| adminR0 | "I downloaded the files into CURA 5.6.0 and CURA scaled them 1000 ! When I printed them they were micro sized. I tried used 2410.3 scale and it seem..." | Read more » | 11 months ago | |||
| B-winters | "Stef, thanks for your interest, I have some new updates and they can be found in this open-source publication: https://doi.org/10.1016/j.ohx.2021.e..." | Read more » | about 3 years ago | |||
| stef | "@realestateediary Are there any further updates to this design? Re the razor slit or any geometric changes? I am very much interested in printing t..." | Read more » | about 3 years ago | |||
| WendyJospeh | "It is a good effort by you. " | Read more » | about 4 years ago | |||
| EllenHarri | "Wow, Good Project " | Read more » | about 4 years ago | |||
| B-winters | " If you are interested in getting access to the original CAD files, they are available for use on www.onshape.com under the file name "Visible Spec..." | Read more » | almost 6 years ago | |||
| B-winters | " chunbr, thanks for you interest. I apologize for missing your comment and questions, I have been exploring some new adaptations to this system tha..." | Read more » | almost 6 years ago | |||
| chunbr | " I did this! Use 25.103 as the multiplier to scale the .stl file to the proper size in Cura and also the diffraction gradings are available on Amaz..." | Read more » | almost 6 years ago | |||
| chunbr | "I did this! Use 25.103 as the multiplier to scale the .stl file to the proper size in Cura and also the diffraction gradings are available on Amazo..." | Read more » | almost 6 years ago | |||
| chunbr | "I made this! The print took about 36 hours and Amazon sells $12 diffraction slides. The .stl files aren't scaled properly when imported to Cura, bu..." | Read more » | almost 6 years ago | |||
| rthalman | "Ok, so here are the links to shapeways: Absorption Cell Body: https://www.shapeways.com/model/3dtools/5722864/0/123?key=0955c52c1c8596f6422b736ebda..." | Read more » | almost 8 years ago | |||
| warren | "Also see this one: https://publiclab.org/notes/briandegger/12-11-2015/silhouette-cut-public-lab-mobile-spectrometer-v2 -- though it's not too flesh..." | Read more » | almost 8 years ago | |||
| warren | "Wow, excellent! You can share a design on Shapeways by clicking "Edit product with this model" in the upper right: Then you can check "Offer for..." | Read more » | almost 8 years ago | |||
| stef | "@warren, @rthalman I will share the build details once I get some fotos. The public library operates on a cost recovery system so the cost of the p..." | Read more » | almost 8 years ago | |||
| rthalman | "@warren I have the .stl files in the description, you can upload those to Shapeways. In PLA on shapeways the absorption cell body costs $26; the Sp..." | Read more » | almost 8 years ago | |||
| warren | "Also, is it possible to order this print on Shapeways, do you think? I'd love to get one but don't have a 3d printer. Anyone want to try uploading ..." | Read more » | almost 8 years ago | |||
| warren | "This is so exciting to see. @stef, would you be willing to post a response using the "Document your attempt to build this" button above the builds ..." | Read more » | almost 8 years ago | |||
| stef | "@rthalman: Hey, I'm not complaining, your design got me going on the 3D printing thing. Insofar as to the Cam temperature, by turning off the autof..." | Read more » | almost 8 years ago | |||
| rthalman | "@stef Thanks for trying out my plans. I also found that the slit width that was printed was sub-optimal. I made a narrower slit with aluminum duct ..." | Read more » | almost 8 years ago | |||
| stef | "@rthalman, @warren I have replicated the design using the printer in my local library as well as the modification to the Life cam where I removed t..." | Read more » | almost 8 years ago | |||
| warren | "This could be a few things, but the simplest is that you built a spectrometer with the camera rotated 180 degrees from the way it should be in the ..." | Read more » | almost 8 years ago | |||
| stef | "It may be the orientation of the camera. If you are using the JDEPC-0V05 as currently shipped with PLAB Spectrometer 3.0 the usb connector should b..." | Read more » | almost 8 years ago | |||
| warren | "Yes, that sounds right. I think the remaining issue was that unfortunately it wasn't clear if the RPi camera can be accessed via the browser webcam..." | Read more » | almost 8 years ago | |||
| rthalman | "Warren, looking at your post (and specifically the size of the camera you are referring to, you could easily interface that by just attaching it to..." | Read more » | almost 8 years ago |