I'm mostly asking out of curiosity. Public Lab's MiniVol documentation focuses on particulate mon...
Public Lab is an open community which collaboratively develops accessible, open source, Do-It-Yourself technologies for investigating local environmental health and justice issues.
All topics »
If you cannot use the ReCaptcha to verify you are not a bot, use this alternative verification.
As an open source community, we believe in open licensing of content so that other members of the community can leverage your work legally -- with attribution, of course. By joining the Public Lab site, you agree to release the content you post here under a Creative Commons Attribution Sharealike license, and the hardware designs you post under the CERN Open Hardware License 1.1 (full text). This has the added benefit that others must share their improvements in turn with you.
sign up to join the Public Lab community
Forgot your password? Reset it here
by kgradow1 |
May 08, 2020 21:41 |
I'm mostly asking out of curiosity. Public Lab's MiniVol documentation focuses on particulate monitoring but does note that it can be used with Tedlar bags. Has anyone used it in this way? @mathew
Hi! as fas as I know MiniVols can really only be used for PM, understanding the makeup of that PM. You can read more about the lab testing offered here : https://publiclab.org/wiki/minivol#Available+types+of+analysis+for+MiniVol+filters
Reply to this comment...
Log in to comment
Can we add a 2um filter to the bucket monitor to capture particulates?
updated 6 days ago
Is the Purple Air sensor an EPA-validated tool?
updated 18 days ago
Have you used the bucket air sampler or other grab sample tool?
updated 20 days ago
Have you used surveys to inform open hardware development?
updated 26 days ago
Can we use a Purple Air through a VPN?
updated 28 days ago
Where can I find good low-cost air quality sensors?
updated about 2 months ago
Can you blur the location of a Purple Air device?
updated 3 months ago
Does anyone have experience assembling low-cost VOC kits using Adafruit’s VOC sensor?
This is part of: