Update: December 19, 2012 Andrew identified University of Colorado Alpine Microbial Observatory t...
Public Lab is an open community which collaboratively develops accessible, open source, Do-It-Yourself technologies for investigating local environmental health and justice issues.
| 13 CURRENT | liz |
January 31, 2013 21:34
| almost 12 years ago
Update: December 19, 2012 Andrew identified University of Colorado Alpine Microbial Observatory that can do sequencing with support from Craig. Ready to do first test with controls on the making the sterile cotton candy sponge mechanism for collecting DNA out of the air, and need to do so before mid-February. We learned that if we scale up in the future, we can make our own sterile sucrose. Update: November 10, 2012 During EcoHack3, a large group of people including Andrew Hill, Mariko Kosaka, Valerie Farber, JD Godchaux, Alyssa Wright, Craig Mills, David Danziger, Erin ???, Liz Barry, and more worked together to sketch out and early prototype this project. See the Research Note of our blackboard brainstorming. DESCRIPTION OF PROJECT EcoHack III - Living Sky This November, as part of the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering DNA Extraction and Amplification being done by Krista McGuire and lab techs. Extraction is important because when you take an air sample, you collect much more than just DNA. Amplification takes those extracted DNA strands and replicates them. This step tests for presence of particular organisms, not for abundance or concentration. Once amplified, we'll send a small part of that sample off to get sequenced, and freeze the rest. Sequencing and Assembly MICROBE COLLECTION The challenge is designing a balloon mounted device that can collect microbes from the air column. Commonly, air sampling of microbes relies on industrial vacuums with filters. These devices are too large and too expensive for our study (for now). Some other options exist.
SAMPLE DESIGN Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | |
| 12 | liz |
December 19, 2012 14:39
| about 12 years ago
Update: December 19, 2012 Andrew identified University of Colorado Alpine Microbial Observatory that can do sequencing with support from Craig. Ready to do first test with controls on the making the sterile cotton candy sponge mechanism for collecting DNA out of the air, and need to do so before mid-February. We learned that if we scale up in the future, we can make our own sterile sucrose. Update: November 10, 2012 During EcoHack3, a large group of people including Andrew Hill, Mariko Kosaka, Valerie Farber, JD Godchaux, Alyssa Wright, Craig Mills, David Danziger, Erin ???, Liz Barry, and more worked together to sketch out and early prototype this project. See the Research Note of our blackboard brainstorming. DESCRIPTION OF PROJECT EcoHack III - Living Sky This November, as part of the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering DNA Extraction and Amplification being done by Krista McGuire and lab techs. Extraction is important because when you take an air sample, you collect much more than just DNA. Amplification takes those extracted DNA strands and replicates them. This step tests for presence of particular organisms, not for abundance or concentration. Once amplified, we'll send a small part of that sample off to get sequenced, and freeze the rest. Sequencing and Assembly MICROBE COLLECTION The challenge is designing a balloon mounted device that can collect microbes from the air column. Commonly, air sampling of microbes relies on industrial vacuums with filters. These devices are too large and too expensive for our study (for now). Some other options exist.
SAMPLE DESIGN Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | |
| 11 | liz |
December 19, 2012 14:26
| about 12 years ago
Update: December 19, 2012 Andrew identified University of Colorado lab that can do sequencing with support from Craig. Ready to do first test with controls on the making the sterile cotton candy sponge mechanism for collecting DNA out of the air, and need to do so before mid-February. We learned that if we scale up in the future, we can make our own sterile sucrose. Update: November 10, 2012 During EcoHack3, a large group of people including Andrew Hill, Mariko Kosaka, Valerie Farber, JD Godchaux, Alyssa Wright, Craig Mills, David Danziger, Erin ???, Liz Barry, and more worked together to sketch out and early prototype this project. See the Research Note of our blackboard brainstorming. DESCRIPTION OF PROJECT EcoHack III - Living Sky This November, as part of the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering DNA Extraction and Amplification being done by Krista McGuire and lab techs. Extraction is important because when you take an air sample, you collect much more than just DNA. Amplification takes those extracted DNA strands and replicates them. This step tests for presence of particular organisms, not for abundance or concentration. Once amplified, we'll send a small part of that sample off to get sequenced, and freeze the rest. Sequencing and Assembly MICROBE COLLECTION The challenge is designing a balloon mounted device that can collect microbes from the air column. Commonly, air sampling of microbes relies on industrial vacuums with filters. These devices are too large and too expensive for our study (for now). Some other options exist.
SAMPLE DESIGN Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | |
| 10 | liz |
December 19, 2012 14:26
| about 12 years ago
Update: Andrew identified University of Colorado lab that can do sequencing with support from Craig. Ready to do first test with controls on the making the sterile cotton candy sponge mechanism for collecting DNA out of the air, and need to do so before mid-February. We learned that if we scale up in the future, we can make our own sterile sucrose. Update: November 10, 2012 During EcoHack3, a large group of people including Andrew Hill, Mariko Kosaka, Valerie Farber, JD Godchaux, Alyssa Wright, Craig Mills, David Danziger, Erin ???, Liz Barry, and more worked together to sketch out and early prototype this project. See the Research Note of our blackboard brainstorming. DESCRIPTION OF PROJECT EcoHack III - Living Sky This November, as part of the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering DNA Extraction and Amplification being done by Krista McGuire and lab techs. Extraction is important because when you take an air sample, you collect much more than just DNA. Amplification takes those extracted DNA strands and replicates them. This step tests for presence of particular organisms, not for abundance or concentration. Once amplified, we'll send a small part of that sample off to get sequenced, and freeze the rest. Sequencing and Assembly MICROBE COLLECTION The challenge is designing a balloon mounted device that can collect microbes from the air column. Commonly, air sampling of microbes relies on industrial vacuums with filters. These devices are too large and too expensive for our study (for now). Some other options exist.
SAMPLE DESIGN Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | |
| 9 | liz |
November 11, 2012 00:43
| about 12 years ago
Update: November 10, 2012 During EcoHack3, a large group of people including Andrew Hill, Mariko Kosaka, Valerie Farber, JD Godchaux, Alyssa Wright, Craig Mills, David Danziger, Erin ???, Liz Barry, and more worked together to sketch out and early prototype this project. See the Research Note of our blackboard brainstorming. DESCRIPTION OF PROJECT EcoHack III - Living Sky This November, as part of the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering DNA Extraction and Amplification being done by Krista McGuire and lab techs. Extraction is important because when you take an air sample, you collect much more than just DNA. Amplification takes those extracted DNA strands and replicates them. This step tests for presence of particular organisms, not for abundance or concentration. Once amplified, we'll send a small part of that sample off to get sequenced, and freeze the rest. Sequencing and Assembly MICROBE COLLECTION The challenge is designing a balloon mounted device that can collect microbes from the air column. Commonly, air sampling of microbes relies on industrial vacuums with filters. These devices are too large and too expensive for our study (for now). Some other options exist.
SAMPLE DESIGN Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | |
| 8 | liz |
November 11, 2012 00:42
| about 12 years ago
Update: November 10, 2012 During EcoHack3, a large group of people including Andrew Hill, Mariko Kosaka, Valerie Farber, JD Godchaux, Alyssa Wright, Craig Mills, David Danziger, Erin ???, Liz Barry, and more worked together to sketch out and early prototype this project. See the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering DNA Extraction and Amplification being done by Krista McGuire and lab techs. Extraction is important because when you take an air sample, you collect much more than just DNA. Amplification takes those extracted DNA strands and replicates them. This step tests for presence of particular organisms, not for abundance or concentration. Once amplified, we'll send a small part of that sample off to get sequenced, and freeze the rest. Sequencing and Assembly MICROBE COLLECTION The challenge is designing a balloon mounted device that can collect microbes from the air column. Commonly, air sampling of microbes relies on industrial vacuums with filters. These devices are too large and too expensive for our study (for now). Some other options exist.
SAMPLE DESIGN Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | |
| 7 | liz |
November 11, 2012 00:39
| about 12 years ago
Update: November 10, 2012 During EcoHack3, a large group of people including Andrew Hill, Mariko Kosaka, Valerie Farber, JD Godchaux, Alyssa Wright, Craig Mills, David Danziger, Erin ???, Liz Barry, and more worked together to sketch out and early prototype this project. See the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering DNA Extraction and Amplification being done by Krista McGuire and lab techs. Extraction is important because when you take an air sample, you collect much more than just DNA. Amplification takes those extracted DNA strands and replicates them. This step tests for presence of particular organisms, not for abundance or concentration. Once amplified, we'll send a small part of that sample off to get sequenced, and freeze the rest. Sequencing and Assembly MICROBE COLLECTION The challenge is designing a balloon mounted device that can collect microbes from the air column. Commonly, air sampling of microbes relies on industrial vacuums with filters. These devices are too large and too expensive for our study (for now). Some other options exist.
SAMPLE DESIGN Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | |
| 6 | liz |
November 11, 2012 00:31
| about 12 years ago
DESCRIPTION OF PROJECT EcoHack III - Living Sky This November, as part of the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering DNA Extraction and Amplification being done by Krista McGuire and lab techs. Extraction is important because when you take an air sample, you collect much more than just DNA. Amplification takes those extracted DNA strands and replicates them. This step tests for presence of particular organisms, not for abundance or concentration. Once amplified, we'll send a small part of that sample off to get sequenced, and freeze the rest. Sequencing and Assembly MICROBE COLLECTION The challenge is designing a balloon mounted device that can collect microbes from the air column. Commonly, air sampling of microbes relies on industrial vacuums with filters. These devices are too large and too expensive for our study (for now). Some other options exist.
SAMPLE DESIGN Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | |
| 5 |
October 10, 2012 17:54
| about 12 years ago
DESCRIPTION OF PROJECT EcoHack III - Living Sky This November, as part of the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering DNA Extraction and Amplification being done by Krista McGuire and lab techs. Extraction is important because when you take an air sample, you collect much more than just DNA. Amplification takes those extracted DNA strands and replicates them. This step tests for presence of particular organisms, not for abundance or concentration. Once amplified, we'll send a small part of that sample off to get sequenced, and freeze the rest. Sequencing and Assembly MICROBE COLLECTION The challenge is designing a balloon mounted device that can collect microbes from the air column. Commonly, air sampling of microbes relies on industrial vacuums with filters. These devices are too large and too expensive for our study (for now). Some other options exist.
SAMPLE DESIGN Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | ||
| 4 | liz |
October 09, 2012 20:32
| about 12 years ago
DESCRIPTION OF PROJECT EcoHack III - Living Sky This November, as part of the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering DNA Extraction and Amplification being done by Krista McGuire and lab techs. Extraction is important because when you take an air sample, you collect much more than just DNA. Amplification takes those extracted DNA strands and replicates them. This step tests for presence of particular organisms, not for abundance or concentration. Once amplified, we'll send a small part of that sample off to get sequenced, and freeze the rest. Sequencing and Assembly CHALLENGES coming.. Collecting from a balloon Getting a big enough sample Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | |
| 3 | liz |
October 09, 2012 20:26
| about 12 years ago
DESCRIPTION OF PROJECT EcoHack III - Living Sky This November, as part of the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering Extraction Amplification Sequencing and Assembly CHALLENGES coming.. Collecting from a balloon Getting a big enough sample Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | |
| 2 |
October 04, 2012 21:46
| about 12 years ago
DESCRIPTION OF PROJECT EcoHack III - Living Sky This November, as part of the EcoHack conference, we will work with a portion of the participants to build a kit to sample microbes in the environment in a way never done before, through citizen science and balloon-based sampling. Over the course of Saturday, teams will hack on numerous projects, among those we intend to support a group that will design and test hardware that will enable microbial sampling from helium balloons. The hardware will include apparatus for microbe sampling as well as the collection of environmental data. On a day following Ecohack (to target overcast skies), teams will spread throughout the New York City metro area with balloon sampling kits. Teams will deploy helium filled balloons carrying environmental sensors and microbial sampling kits. Sampling will be done at or around 500 feet. Samples will be retrieved and prepared for transport back to storage and preparation facilities. All samples will be given a unique identifier that will allow them to be linked back to sampling and environmental data collected. Over the course of the following weeks, samples will be sequenced and published online. IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering Extraction Amplification Sequencing and Assembly CHALLENGES coming.. Collecting from a balloon Getting a big enough sample Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA location and replications per location (e.g. 10 samples in NYC), coming... FUTURE DIRECTIONS We intend to seek funding for continued sampling events and to cover the cost of continued sequencing. Funding will be used to ship the sampling kit to groups across the globe interested in replicating the study (classrooms, science events, and others). Ideally, this funding will be gathered through a combination of agency support (i.e. UNEP) and a microfunding campaign through a site such as Kickstarter or Petridish. Funding a travelling microbial sampling kit has valuable implications for scientific research, education, public health, and human safety. Knowing which microbes dominate the biodiversity in clouds over Manhattan, versus those in the skies over a city such as Dubai will help us better understand the links between microbes and air quality, climate, and disease. While the primary goal of the travelling kit will be new scientific knowledge, we will not be directly pursuing a publication from the data. Instead, data will be made available immediately following collection to anyone interested, likely including some of our partners. In this way, the citizens collecting the data can help advance a broad diversity of scientific missions. The project will represent many firsts in microbiology, aeromicrobiology, citizen science, and global biology research. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | ||
| 1 |
September 20, 2012 18:52
| over 12 years ago
DESCRIPTION OF PROJECT coming... Launch balloons carrying sampling equipment into clouds over New York City, collect cloud water, isolate microbial DNA, sequence, and publish results as open-data for research. ECOHACK III IMPACTS Airborn microbial populations may have profound impact on the world around us. Some known areas of interest include, climate and weather, human health, agricultural health, and global environmental change. It has been found previously that clouds offer a unique environment for fairly abundant microbial populations (see Amato 2012) and that there are enough microbes in the clouds to affect physicochemical processes. SEQUENCING WORKFLOW coming... Collection Filtering Extraction Amplification Sequencing and Assembly CHALLENGES coming.. Collecting from a balloon Getting a big enough sample Replicating the study enough times (both globally and in the same location) to build a substantial metagenomic (see Wooley et al. for an overview) dataset of cloud biodiversity over space and time. ENVIRONMENTAL DATA coming.. Importance of metadata Combing sampling with the environmental sampling technologies developed in EcoHackII to record the environment of our sample. SAMPLING SCHEMA coming... replications per location (e.g. 10 samples in NYC) layout FUTURE DIRECTIONS coming... Refine the open hardware kit and move toward non-cloud air column sampling. PREVIOUS SAMPLING METHODS Bauer et al., Cultivable airborne microorganisms were collected directly from the ambient air under out-of-cloud conditions onto sterile cellulose nitrate filters (Sartorius, 47 mm ∅, bacteria: pore width: 0.45 μm; fungi: pore width: 0.8 μm), which were mounted in open face polycarbonate filter holders, which have been disinfected with 70% ethanol and isopropanol prior to sampling. The sampling time was 5 min at a flow rate of 24 l min−1. Loaded filters were placed onto agar plates within 10 min. SCIENTIFIC PUBLICATIONS Amato P. 2012. Clouds Provide Atmospheric Oases for Microbes. Microbe Bauer, H., A. Kasper-Giebl, M. Löflund, H. Giebl, R. Hitzenberger, F. Zibuschka, and H. Puxbaum. 2002. The contribution of bacteria and fungal spores to the organic carbon content of cloud water, precipitation and aerosols. Atmos. Res. 64:109-119. Wooley JC, Godzik A, Friedberg I (2010) A Primer on Metagenomics. PLoS Comput Biol 6(2): e1000667. doi:10.1371/journal.pcbi.1000667 |
Revert | ||
| 0 | liz |
September 20, 2012 17:41
| over 12 years ago
|
Revert |