Madeira
A page to collect project documentation and open questions on a range of topics for a December workshop in Madeira.
Questions
Title | Author | Updated | Likes | Comments |
---|---|---|---|---|
Do people who collaborated at the Madeira Open Institute event have photos to share? | @warren | almost 7 years ago | 0 | 2 |
Multispectral imaging
The Infragram project brings together a range of different efforts to make Do-It-Yourself plant health comparisons possible with infrared photography. Vineyards, large farms, and NASA all use near-infrared photography for assessment, usually by mounting expensive sensors on airplanes and satellites. Infrared analysis is used for a variety of things, but most focus on assessing plant health, such as:
- to assess crops and #agricultural practices
- better #soil management (reducing #fertilizer, soil treatments)
- in #wetlands analysis
Title | Author | Updated | Likes | Comments |
---|---|---|---|---|
Can we use a color calibration reference card to calculate absolute values for DIY NDVI? | @warren | about 7 years ago | 1 | 1 |
Best low cost camera for indoor plants? | @DrC | over 6 years ago | 1 | 3 |
I am getting very low NDVI values. | @Anice | almost 6 years ago | 1 | 4 |
What is the working principle of Blue/Red filter | @nickyshen0306 | over 5 years ago | 0 | 2 |
How can we stream video to SpectralWorkbench.org or Infragram.org from a Raspberry Pi camera? | @warren | about 7 years ago | 2 | 2 |
Can we create a guide or set of guides to interpreting infrared or NDVI images? | @warren | about 7 years ago | 0 | 3 |
Can I use a Raspberry Pi with the Pi Noir camera to make NDVI images? | @warren | about 7 years ago | 0 | 2 |
Spectrometry
The Public Lab spectrometry project is an open source community effort to develop low-cost spectrometers for a range of purposes. Our most recent projects are the Lego Spectrometer Kit and the Papercraft Spectrometer Kit.
Microscopes
The Basic Microscope Kit is an introductory Do-It-Yourself microscope made from affordable and easy to find parts. Our goal is to measure #silica particles in the air, #microplastics, and other things using a simple-to-assemble kit.
Title | Author | Updated | Likes | Comments |
---|---|---|---|---|
What is an estimated cost for this project? | @pdhixenbaugh | over 4 years ago | 1 | 3 |
What are different ways to collect respirable dust samples for analysis? | @warren | almost 7 years ago | 0 | 2 |
How can we set up a Raspberry Pi camera as an ethernet USB device to avoid using WiFi | @warren | about 7 years ago | 1 | 5 |
What are some ways to collect dust or particulate samples for analysis? | @warren | about 7 years ago | 1 | 4 |
Hydrogen Sulfide
The Hydrogen Sulfide Copper Prototyping Kit is a new project looking at whether burnishing copper can be used as a means to measure the presence of toxic hydrogen sulfide gas. This is an early prototype which needs a lot of work on initial kit design and testing:
Title | Author | Updated | Likes | Comments |
---|---|---|---|---|
What are some options for copper materials to make a copper plate test kit? | @warren | about 7 years ago | 0 | 3 |
Can you use rubbing alcohol or nail polish remover for prepping copper for Hydrogen Sulfide test? | @zengirl2 | about 7 years ago | 2 | 16 |
How can we safely try out and evaluate a hydrogen sulfide test? | @warren | about 7 years ago | 1 | 4 |
What's the best setup for a copper rod or copper plate test for DIY hydrogen sulfide detection? | @warren | about 7 years ago | 1 | 6 |