Public Lab Wiki documentation



Formaldehyde Exposure

This is a revision from September 01, 2015 00:43. View all revisions
5 | 42 | | #11829

What is formaldehyde?

Formaldehyde is a Volatile Organic Compound (VOC). It's a colorless, flammable gas with a distinct odor -- it's a major component in "new car smell." The chemical formula for formaldehyde is HCHO.

What are common sources of formaldehyde in the home?

  • wood floor finishes
  • pressed-wood products
  • wallpaper and paints
  • the combustion and oxidation of other hydrocarbons (including cigarettes, oil, natural gas, and emissions from laser printers and photocopiers).

Is formaldehyde regulated in indoor environments?

  • Household formaldehyde exposure is not regulated in the United States.
  • Workplace formaldehyde exposure is regulated in the United States, but federal regulations diverge from federal science regarding what safe exposure limits are. More on this below.

In what units is formaldehyde measured?

Formaldehyde concentrations in the air are measured in parts per million (ppm) or parts per billion (ppb). The Kitagawa tubes used in the DIY Formaldehyde Test Kit are in ppm.

Here's a handy expression for mentally moving between parts per million and parts per billion:

0.01ppm = 10 ppb

How does formaldehyde come into contact with my body?

The formaldehyde from the products listed above can off-gas into the surrounding environment and be inhaled. Formaldehyde is very reactive, so reactive it doesn't travel very far into the body: if it's present in liquid or air and comes in contact with the body, it will react with the first body surface it comes in contact with -- mucus membranes, mostly, causing lung irritation, throat irritation, eye irritation and chemical sensitization (when people are exposed to industrial chemicals and become sensitive to them).

Who is studying the effects of formaldehyde on human health?

The State of California

Cali-OEHHS.gif

The California Office of Environmental Hazards and Hazard Assessment (OEHHA) has published Reference Exposure Levels of 7ppb: http://oehha.ca.gov/air/hot_spots/pdf/FormaldehydePR.pdf

carb-logo.jpg

The California Air Resources Board (CARB) has issued a report, http://www.arb.ca.gov/research/apr/past/04-310.pdf. On page 210, VENTILATION AND INDOOR AIR QUALITY IN NEW HOMES, CALIFORNIA ENERGY COMMISSION 2009, CEC-500-2009-085:

  • 98% of the homes exceeded the Chronic and 8‐hour RELs of 9 μg/m3
  • 59% exceeded the ARB indoor air guideline of 33 μg/m3
  • 28% exceeded the OEHHA Acute REL of 55 μg/m3

By current estimates, 98 percent of new homes have indoor formaldehyde levels greater than 7ppb for the first 2-5 years. These are levels capable of inducing asthma-like respiratory symptoms.

The United States Federal Government

cdc-atsdr.png

The US Agency for Toxic Substances and Disease Registry (ATSDR) -- part of the Center for Disease Control -- maintains toxicological profiles for a number of substances, including formaldehyde. ATDSR has published Minimum Risk Levels (MRL) (the level below which there are no expected health effects) for formaldehyde:

  • 0.04 ppm (acute);
  • 0.03 ppm (intermediate);
  • 0.008 ppm (8 ppb) (chronic)

The following chart (Figure 1) summarizes the scientific evidence on the health effects of varying concentrations of formaldehyde exposure as most recently updated by ATSDR in 2010.

720px-US-OSHA-Logo.svg.png

The Occupational Safety and Health Administration (OSHA) workplace standard for "non-irritating" is (0.1ppm) [source: OSHA 1910.1048(l)(1)(ii)] and is an order of magnitude higher than airborne formaldehyde concentrations that have the potential to pose a chronic exposure risk (.008ppm) [source: ATDSR MRL] . The concentration at which OSHA can take regulatory action against a company (0.5ppm) is an order of magnitude higher than the minimum risk level for acute exposure (.04ppm) [source: ATDSR MRL]. Unfortunately, OSHA standards are based upon methods that are available only behind a paywall, inhibiting their accessibility by the public. ANSI/HPVA HP-1-2009

What does it feel like to have formaldehyde in your indoor air?

Participants in the Where We Breathe study are most likely to be exposed at lower levels described in this chart (up to 0.6 ppm, or 600 ppb). This summary suggests that there is strong scientific evidence for formaldehyde having a range of human health effects at these lower levels of exposure: nasal and eye irritation, impaired short-term memory, change in pulmonary function, and exacerbation of asthma or allergies.

hcho_sypmtoms.jpg

Figure 1. Existing evidence, health effects of breathing formaldehyde in humans and in animals. Reproduced from Addendum to the Toxicological Profile for Formaldehyde by the Agency for Toxic Substances and Disease Registry, 2010, p. 2.

To these symptoms on which scientific consensus already exists, we add a number of candidate symptoms observed at higher levels of formaldehyde exposure:

  • nausea
  • headaches
  • throat and skin irritation
  • cough
  • respiratory discomfort

...and also those symptoms reported to WWB investigator Nick Shapiro during his fieldwork with individuals living in FEMA-distributed trailers after Hurricane Katrina:

  • insomnia
  • nightmares
  • digestive trouble
  • changes in sense of smell or taste

Bibliography:

1.Agency for Toxic Substances and Disease Registry (ATSDR). 1999. Toxicological Profile for Formaldehyde. Addendum to the Profile for Formaldehyde. Atlanta, GA: U.S. Department of Health and Human Services, Public Health Service. (2010).

2.Dales, R. E., Schweitzer, I., Bartlett, S., Raizenne, M. & Burnett, R. Indoor Air Quality and Health: Reproducibility of Respiratory Symptoms and Reported Home Dampness and Molds using a Self-Administered Questionnaire. Indoor Air 4, 2–7 (1994).

3.Hanrahan, L. P., Dally, K. A., Anderson, H. A., Kanarek, M. S. & Rankin, J. Formaldehyde vapor in mobile homes: a cross sectional survey of concentrations and irritant effects. American journal of public health 74, 1026–7 (1984).

4.Kanazawa, A. et al. Association between indoor exposure to semi-volatile organic compounds and building-related symptoms among the occupants of residential dwellings. Indoor Air 20, 72–84 (2010).

5.Liu, K. S., Huang, F. Y., Hayward, S. B., Wesolowski, J. & Sexton, K. Irritant effects of formaldehyde exposure in mobile homes. Environmental health perspectives 94, 91–4 (1991).

6.Mori, M. et al. Changes in subjective symptoms and allergy state among medical students exposed to low-level formaldehyde 6 months after completion of a gross anatomy dissection course. Environ Health Prev Med 18, 386–393 (2013).

7.Ritchie, I. M. & Lehnen, R. G. Formaldehyde-related health complaints of residents living in mobile and conventional homes. American journal of public health 77, 323–8 (1987).

8.Sahlberg, B., Norbäck, D., Wieslander, G., Gislason, T. & Janson, C. Onset of mucosal, dermal, and general symptoms in relation to biomarkers and exposures in the dwelling: a cohort study from 1992 to 2002. Indoor Air 22, 331–338 (2012).

9.Saijo, Y. et al. Symptoms in relation to chemicals and dampness in newly built dwellings. International archives of occupational and environmental health 77, 461–70 (2004).

10.Takigawa, T. et al. Relationship between indoor chemical concentrations and subjective symptoms associated with sick building syndrome in newly built houses in Japan. Int Arch Occup Environ Health 83, 225–235 (2010).

11.Thun, M. J., Lakat, M. F. & Altman, R. Symptom survey of residents of homes insulated with urea--formaldehyde foam. Environmental research 29, 320–34 (1982).

12.Wargocki, P., Wyon, D. P., Baik, Y. K., Clausen, G. & Fanger, P. O. Perceived air quality, sick building syndrome (SBS) symptoms and productivity in an office with two different pollution loads. Indoor air 9, 165–79 (1999).