Public Lab Wiki documentation

Jeffrey Warren has extensively investigated using 555 circuits to trigger cameras via CHDK. This appears to be the least expensive option, his notes are here.

Chris Fastie has explored Jeff's 555 setup and refined it into a beautifully constructed timer setup that costs less than $20:

for making completely DIY 555 circuits, see Mathew Lippincott's note here.

Chris has also used a tiny remote control purchased on ebay. his notes and KAP forum discussions here.

And an AuRiCo, or AutoRigController, sold in the states by Brooks Leffler. His notes are here and here. The AuRiCo is quite capable and very small and lightweight, but costs a lot (it can also control two servos). The one sold at Brooxes for US$64 is a special version that DOES NOT HAVE an output for USB shutter release via CHDK. So it requires a US$44 cable (same page) to work via USB. Peter Engels sells a version that does have an output for USB triggering via CHDK.

Jeffrey Warren has extensively investigated using 555 circuits to trigger cameras via CHDK. This appears to be the least expensive option, his notes are here. for completely DIY 555 circuits, see Mathew Lippincott's note here.

Chris Fastie has explored the 555 setup and two other options providing greater degrees of control. His 555 timer setup is beautifully constructed and costs less than $20:

Chris has also useda tiny remote control purchased on ebay. his notes and KAP forum discussions here.

And an AuRiCo, or AutoRigController, sold in the states by Brooks Leffler. His notes are here and here. The AuRiCo is quite capable and very small and lightweight, but costs a lot (it can also control two servos). The one sold at Brooxes for US$64 is a special version that DOES NOT HAVE an output for USB shutter release via CHDK. So it requires a US$44 cable (same page) to work via USB. Peter Engels sells a version that does have an output for USB triggering via CHDK.