This page will host instructions on assembling and using the infrared/visible dual camera kit as distributed through the Balloon Mapping Kit Kickstarter project.

This page is under construction but please get in touch on the mailing list if you want to collaborate on creating it.

Introduction

• How this works, why we do it (theory and science)
• What it's useful for (applications, case studies)
• How far we've gotten
• Things to try and/or improve (how/where to contribute)

Construction

• Assemble the camera bracket
  • Putting the T rig inside a big soda bottle, or other techniques to protect the cameras.
  • Attaching the timer and batteries. This will evolve as soon as people try to use the rig.
  • Use the camera strap as a safety landyard.
• Simple: - just trigger cameras with rubber bands
• Advanced: Assemble the electronics
  • Assembling the 555 timer circuit
  • Preparing USB cables
  • Preparing batteries and battery holders
• Install and configure the software
  • Choosing an SD card and loading the software
  • Configuring the camera menus

Using your kit

• Do a test flight

Processing the images

• Link to Photoshop/Gimp technique
• Video screencast of MapKnitter technique
• Brainstorm better techniques

Interpretation

• This will be written last

Attached is the "introduction" document which shipped with each kit (also editable in Google Docs). For help, please contact the mailing list -- either register on Public Laboratory or email publiclaboratory@googlegroups.com.