Comment flagged.

picavet
picavet


Author Comment Last activity Moderation
RoderickRead "It may be that the video processing in the different camera chips handle movement differently .. thus the apparent delay and re-synch Is there a st..." | Read more » over 10 years ago
jbest "Ha! I like the name "Gumby rigs". Thanks for the link to the Becot design, that gives me some ideas for the future. Spinning was the main problem o..." | Read more » over 10 years ago
cfastie "That's a really original design. 80 grams for the rig is nice. I like the way the Picavet arm serves to protect the camera, and the way the camera ..." | Read more » over 10 years ago
mathew "thanks. Yup, those have a problem with the latch weakening, making them less-than-reuseable, and easy to accidentally push while tightening. We sw..." | Read more » over 10 years ago
jbest "mathew, I added a picture of the kind of zip tie that didn't work well for us. " | Read more » over 10 years ago
mathew "we recently switched from side tab to top tab ties. could you post a photo of the ones you used? The old ones were not as reliable. " | Read more » over 10 years ago
adam-griffith "hmmmm... for downward facing, overhead shots? def. less tangley... not sure that would always face down though. does it? " | Read more » over 10 years ago
mathew "Adam, Make a pendulum rig instead-- I'm finding them easier/steadier/less tangley https://www.flickr.com/photos/14397636@N07/9414831007/ " | Read more » over 10 years ago
adam-griffith "Yes, I actually joined the SFM discussion forum. It looks like I had trouble with the pba and dll installations. I was trying for a 64 bit versio..." | Read more » over 10 years ago
jbest "Glad you mentioned that you had problems with VisualFSM because I did too. I also don't remember the specific problem but eventually I had success ..." | Read more » over 10 years ago
adam-griffith "Oh wow - that tutorial is awesome! I've had some problems with the 64-bit version on SFM and this might help. I was getting stuck at the SIFT or ..." | Read more » over 10 years ago
adam-griffith "Hi Jason, That sounds like the perfect application and we look forward to anything you have to share! Good luck! Adam " | Read more » over 10 years ago
jbest "Adam, thanks for the tips! I'll try the electrical tape next time. Aside from the minor problems, we had a great couple of flights, both with some ..." | Read more » over 10 years ago
adam-griffith "Awesome! Thanks! " | Read more » over 10 years ago
jbreen "Which version, Adam? I think they've all been less than $10. The all metal one I think was closer to $5. The IKEA trash bin one is the most expen..." | Read more » over 10 years ago
adam-griffith "Hi Jessi - any idea what your cost on your DIY picavet is? " | Read more » over 10 years ago
adam-griffith "Hi there, jbest! Did you get usable images? Sounds like you had a good flight. Just a couple of notes: 1) I use electrical tape on the neck of ..." | Read more » over 10 years ago
TedF "Thanks for the reply... will try with the a (styrofoam) block between platform and camera, until I make the next one with pulleys. Cheers! " | Read more » almost 11 years ago
cfastie "TedF, Good design. Just drag and drop photos to where the cursor is in the edit window. Blocks (pulleys) will help a lot to keep it level, especial..." | Read more » almost 11 years ago
TedF "Can I attach more pictures??? " | Read more » almost 11 years ago
John_Wells "No problems ;o) " | Read more » over 11 years ago
warren "Hi, John - did you have trouble posting the comment? I'm sorry, we are writing a new site and hope to have it up in the next couple months. This on..." | Read more » over 11 years ago
John_Wells "An electronic switch from ebay: http://www.ebay.co.uk/itm/130364162243?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 The electrical bit is..." | Read more » over 11 years ago
warren "Whoa, is this your own clockwork, or from a kitchen timer or something? Wow! " | Read more » over 11 years ago