| Author | Comment | Last activity | Moderation | ||
|---|---|---|---|---|---|
| cfastie | "Fusion 360 did not allow me to open the f3d file. It said that opening local files was not supported. I was not expecting that. So I opened the mo..." | Read more » | over 8 years ago | |||
| mathew | "I was able to download the mesh from 123D catch. If it proves equivalent, then maybe that's the free way to get the model. We'll have to ask duri..." | Read more » | over 8 years ago | |||
| ranon | "You're welcome, let me know how it turns out! " | Read more » | over 8 years ago | |||
| cfastie | "The new bulge looks perfect. I will give the new f3d file a spin tonight. Thanks. " | Read more » | over 8 years ago | |||
| ranon | " I also had a chance to make some changes to the leg bracket, which I have updated in Thingiverse. The primary change I made was to the bulge in t..." | Read more » | over 8 years ago | |||
| ranon | "Hi Chris, Glad you've found the UDEMY course helpful! Actually, there's been a very exciting new update for Fusion that lets you directly edit .st..." | Read more » | over 8 years ago | |||
| cfastie | "That UDEMY course is very good. I have been watching videos and making the models as he does. I think there is hope. I still can't make any useful ..." | Read more » | over 8 years ago | |||
| tonyc | "Improvements for next round: shorter tube for top piece, the length that connects to the top chopsticks. By shortening, will cut down weight, but..." | Read more » | over 8 years ago | |||
| hagitkeysar | "I love the distorted grass image. " | Read more » | over 8 years ago | |||
| ranon | "Hi Chris, Regarding the Fusion 360 tutorials, I have a former professor who recently published a free course teaching Fusion 360. Here's a link to..." | Read more » | over 8 years ago | |||
| klie | "Whoa thanks for sharing that link @mathew - good Saturday read :) A++ " | Read more » | over 8 years ago | |||
| cfastie | "The print looks really good. There is plenty of room for the nuts. There are a few details that could be adjusted: I mentioned the leg holes shou..." | Read more » | over 8 years ago | |||
| ranon | "Sure thing I'll extend those as far as they'll go. Look forward to hearing how it prints! " | Read more » | over 8 years ago | |||
| cfastie | "Awesome. It is definitely beginning to look like a prop from a Marvel movie. The two leg holes do not seem to be very deep. Can they be extended al..." | Read more » | over 8 years ago | |||
| ranon | "Thanks Chris! I designed a new leg support structure and uploaded the updated model. I designed the support structure using T-spline modeling (..." | Read more » | over 8 years ago | |||
| cfastie | "I like the bulge. It might be more forward than it has to be (it blocks screwdriver access to the front screws) and not out to the sides as much as..." | Read more » | over 8 years ago | |||
| ranon | "Hey Chris, I made changes to those areas you pointed out yesterday and have uploaded a new version. Is this the sort of bulge you were referrin..." | Read more » | over 8 years ago | |||
| mathew | "Glenn Davison has answered many of these questions in the AKA guide to kite flying. I can't believe I'd never seen it before. A+ excellent: http:..." | Read more » | over 8 years ago | |||
| cfastie | "Very nice. I printed the last one. You got the spacing so the nuts will fit exactly right. I think the indents for screw heads on the new model c..." | Read more » | over 8 years ago | |||
| ranon | "Ok I have updated the thingiverse post and I think I've addressed all of the points you brought up, unless I misunderstood them. The leg tubes ar..." | Read more » | over 8 years ago | |||
| cfastie | "That looks cool. I will start a print when the current Aerobee Rig camera tray print is done. It looks like the walls on the outside of the angled ..." | Read more » | over 8 years ago | |||
| ranon | "I made a new model designed to address the layer separation issue. It is larger than the previous version, but I think the print time should actual..." | Read more » | over 8 years ago | |||
| mathew | "Of these options, the rubber band holds the firmest-- simplest and cheapest, though rather ugly looking. @cfastie's points about pins are good one..." | Read more » | over 8 years ago | |||
| ranon | "Glad to help! I have a design in mind for solving the support issue the way you're describing, I'll get back to you with that model as soon as I ge..." | Read more » | over 8 years ago |