Question: What are different commercially available hydrogen sulfide detection methods?

warren is asking a question about hydrogen-sulfide: Subscribe to answer questions on this topic

warren asked on December 04, 2017 19:54
237 views | 3 answers | #15298

We're compiling information about the:

  • pros & cons
  • prices
  • sensitivity/limitations

about each of these techniques.

See the https://publiclab.org/wiki/hydrogen-sulfide-detection as well for more resources -- I've seen a few documented across the site!

Share

3 Comments

  
warren commented almost 2 years ago

https://publiclab.org/notes/megan/4-2-2012/possible-sensor-field-calibration-photo-test-strips shows some ~$200 wearable electronic sensors for H2S:

sensor

Reply to this comment...


  
warren commented almost 2 years ago

Also see this post by @megan:

$20 a day from Safety Alliance in Farmington, (505)-325-7233 I have included this link to information on the Gas Badge Plus http://www.durawear.com/index.cfm/a/catalog.prodShow/vid/485/catid/145

That link is broken, but this worked: http://www.amsequipment.com/gas-detection-equipment/portable-monitors/gasbadgeplus

Also found this one, the MSA Altair, and a few others on the Duraware.com site above (although the others were over $1000)

$99: https://www.durawear.com/msa-altair-h2s-hydrogen-sulfide-single-gas-detector-low-alarm-10-ppm-high-alarm-15-ppm-mfg-10092521/

9AA7028C151758531473DA56534503F1L__04931.1444844500.165.165.jpg

Reply to this comment...


  
warren commented almost 2 years ago

And read about air grab sampling as the Louisiana Bucket Brigade and other bucket brigades do: https://publiclab.org/wiki/air-sampling

Reply to this comment...


Log in to comment