Comments

Comment Last activity Moderation
"That's awesome, we'd love to see it in a post on PublicLab.org if you're interested in sharing! " | Read more » 2 months ago
"Hi @mimiss, in case this is helpful! Hoping to add more docs here as time goes on, like photos with different types of plugs, etc! " | Read more » 3 months ago
"TRRS plugs (4-pin plugs) are not super consistent, but this worked for me. I'll try to upload another pic with the exact pins of the jack also shown! " | Read more » 4 months ago
"Here's a pic of a WebJack plug (using a 4-pin jack) attached to pins 3 and 6 of the #Simple-Air-Sensor, which has WebJack installed by default: ..." | Read more » 4 months ago
"COMMUNITY QUESTION: Are there apps or devices to warn residents about airborne toxins?https://t.co/Eh0PvmUjQd pic.twitter.com/s5o3VFYqfh— Public La..." | Read more » 4 months ago
"Re: "As you know, we're moving in the opposite direction" For sure, and I think we're on the same page on the need for lower cost monitoring. One ..." | Read more » 6 months ago
" " | Read more » 6 months ago
"Ok so I found this new product category for fans and carbon filters that's pretty cheap, and they're intended for hydroponics. VIVOSUN 4 Inch 203 ..." | Read more » 6 months ago
"I'm going to order a couple of these fans to test this out: $11 https://www.amazon.com/dp/B07RT95Z1Y/ " | Read more » 6 months ago
"Yes, and the aromatic baby powder is nice because you can smell it. Great idea. We're going to try prototyping this activity soon. With 3+ sensors,..." | Read more » 6 months ago
"This is a cool idea esp. the site-planning with "buildings" or air barriers. I heard a good comment about this on Instagram too, where i'd posted -..." | Read more » 6 months ago
"@molangmuir10 @sadieprego @zengirl2 @nanocastro @mimiss I thought you might be interested in this! " | Read more » 6 months ago
"@crispinpierce @OrionAllgaier I was thinking of how people may bridge from a Simple Air Sensor (or similar) to a Purple Air (#purple-air) or even a..." | Read more » 6 months ago
"OK, update - since the B sensor was covered yesterday, it's now showed as "downgraded" just as the A was yesterday: My question now, is apart fr..." | Read more » 7 months ago
"How can I add a Marker on the Location (lat, long coordinates)? Right now I am could view the exact area of the place but I don't know where I am e..." | Read more » 7 months ago
"Super! Actually there are a number of folks across the Public Lab network in the Bangalore area, would you have any interest in being in touch? I k..." | Read more » 7 months ago
"OK! After now blocking the B sensor instead, it's accepting A data once more, and hasn't yet flagged the B sensor. Interesting! " | Read more » 7 months ago
"Aha! One day later, my sensor A has been "downgraded"! I'll move the tape to the other sensor and see what happens. " | Read more » 7 months ago
"i'll post more soon, but one is now totally blocked and it shows on the graph, but it's not rejecting the data. I'll let this run for a day. Then ..." | Read more » 7 months ago
"OK, i covered it more thoroughly and will wait a while to report back on what happens. " | Read more » 7 months ago
" OK testing this out now. Here's our sensor, on Cromwell St at our office: https://www.purpleair.com/map?582419|582421#13/41.81161/-71.41883 Note ..." | Read more » 7 months ago
" Hi! This sounds great, thanks for posting!!! " | Read more » 7 months ago
"This is great, thanks @kkoerner -- and interesting to see that they'll flag sensors. I wonder how much two would have to not correlate before it go..." | Read more » 7 months ago
" @julieta @nanocastro have either of you used 2 sensors in your DIY #plantower -based devices? #maca etc? " | Read more » 8 months ago