Here is my screenshot of my set https://spectralworkbench.org/sets/2874, three scans of crude oil using a blue laser.
My experimental setup is a bit odd so i'll attach a photo. i had to angle the spectrometer to get a scan. I also had to cut the slots on the cuvette holder 1/8" lower for two reasons:
- so that the laser could shine in, and
- the fluorescence could shine out and be read by the spectrometer.
1 Comments
Now that i built a second cuvette holder, i believe that i had an assembly error in this one.
Reply to this comment...
Log in to comment
Login to comment.