Public Lab Wiki documentation


Smartphone spectrometer

This is a revision from August 29, 2013 21:00. View all revisions
5 | 29 | | #9075

« Back to Spectrometer
This page is under construction.

List of parts

  • 3 injection molded plastic (ABS) parts
  • 2 short screws
  • 2 long screws
  • black paper liner
  • diffraction grating
  • protective film
  • jewelers screwdriver

Instructions

  1. Carefully pull out the grating without getting dust or fingerprints on it, and lay it ...
  2. Place the double-sided tape on the interior of the molded plastic parts as shown

IMG_20130827_164804.jpg

Share

Public Lab is open for anyone and will always be free. By signing up you'll join a diverse group of community researchers and tap into a lot of grassroots expertise.

Sign up