Replicator 1 Dual Parts and Upgrades This is a list of suppliers (with links and/or part numbers...
Public Lab is an open community which collaboratively develops accessible, open source, Do-It-Yourself technologies for investigating local environmental health and justice issues.
| 22 | cfastie |
January 24, 2016 02:01
| over 8 years ago
Replicator 1 Dual Parts and Upgrades This is a list of suppliers (with links and/or part numbers) for drop in replacements or upgrades for the MakerBot Replicator 1 Dual 3D printer. Most of the parts listed currently are probably not correct, but are the closest I could find. Extruder upgrade (filament drive block to replace the OEM Delrin plunger system) Extruder fan [these are good for the Rep 1 --CLF] Thermocouple (Are these all for the Replicator 2/2x?) Heater element (These all seem to be for the Rep 2/2x) Ceramic insulation tape Extruder spring for upgraded filament drive Extruder nozzles (generally we want 0.4mm MK8 nozzles) Replacement hot end X-end stop cable X-axis cable X-axis idler pulley (for GT2 belt, inner bore is 4 mm, OEM pulley has 15 teeth but that might not matter)
Stepper motor driver Voltage regulator (DC/DC converter) Z-arm stiffeners |
Revert | |
| 21 | cfastie |
January 24, 2016 01:56
| over 8 years ago
Replicator 1 Dual Parts and Upgrades This is a list of suppliers (with links and/or part numbers) for drop in replacements or upgrades for the MakerBot Replicator 1 Dual 3D printer. Most of the parts listed currently are probably not correct, but are the closest I could find. I am initialing my approval [ --CLF] if I think the part is appropriate for the Rep 1. Feel free to do the same. Please add a note if an entry is obviously not appropriate for the Rep 1 Dual. If MakerBot is the only source for a part, please note that. If some parts require a modification to work with the Rep 1 Dual, please describe the modification. Extruder upgrade (filament drive block to replace the OEM Delrin plunger system) 1. From Devilsinthedetails [good for the Rep 1 --CLF] http://www.devilsinthedetails.ca/ $100.00 + shipping 2. From MakerBot (this is just the hardware if you 3D print the block parts. Is this Rep 2 version good for the Rep 1?) http://store.makerbot.com/catalog/product/view/id/358/category/22/ $15.00 + shipping 3. Models on Thingiverse for printing the block http://www.thingiverse.com/thing:53125 (This one from MakerBot) http://www.thingiverse.com/thing:435912 http://www.thingiverse.com/thing:70306 http://www.thingiverse.com/thing:231310 Extruder fan [these are good for the Rep 1 --CLF] 1. From MakerBot http://store.makerbot.com/catalog/product/view/id/419/category/22/ 6.50 + shipping 2. From RobotShop http://www.robotshop.com/en/replicator-2-2x-extruder-cooling-fan.html $6.99 + shipping Thermocouple (Are these all for the Replicator 2/2x?) 1. From Wanhao 1 m long, lug on one end for mother board http://wanhaousa.com/collections/hotend-parts/products/thermocouple $14.00 incl shipping 2. From Fargo 3D Printing MakerBot OEM replacement for Replicator 2 http://www.fargo3dprinting.com/products/makerbot-replicator-2-thermocouple/ $45.00+ $2.00 shipping 3. From Performance 3D for Replicator 2/2x http://www.p3-d.com/products/replicator-2-2x-thermocouple $44 (solid wire), $66 (stranded wire), $2 to $5 shipping Heater element (These all seem to be for the Rep 2/2x)
Specs for Replicator 1 dual: 24V 40-45W cartridge, ¼ inch diameter exactly
1. From Wanhao
http://wanhaousa.com/collections/hotend-parts/products/heating-core Ceramic insulation tape 1. From Fargo 3D http://www.fargo3dprinting.com/products/makerbot-replicator-2-ceramic-insulation-tape/ $3.95 cut to fit Replicator 2, $20.00 for 6 Extruder spring for upgraded filament drive 1. From McMaster Carr part: 94125K612 [this works one the Rep 1 --CLF] http://www.mcmaster.com/mv1452544250/#catalog/121/1264/=10ny9ce $10.36 pkg of 6 + shipping Extruder nozzles (generally we want 0.4mm MK8 nozzles) 1. From Performance 3D [good of the Rep 1 --CLF] http://www.p3-d.com/collections/duraplat-3d-extruder-nozzles $13.49 + shipping Replacement hot end 1. From RobotShop (these are for Rep 2, I don’t know if they work on Rep 1) http://www.robotshop.com/en/replicator-2-hot-end-assembly-w--stranded-thermocouple.html $130.99 + shipping X-end stop cable 1. From Uncle Chuck’s On this page : http://www.unclechucks3dprinterstuff.com/catalog%20parts%2011.htm • Cable - Stop Switch To Motherboard • Item # CCSS - 01 $9.75 X-axis cable 1. From Uncle Chuck’s On this page: http://www.unclechucks3dprinterstuff.com/catalog%20parts%2011.htm • Cable - Motherboard to Stepper Motor • Item # CCSM - 01 $11.75 2. Alternate solution for x end stop cable and x-axis cable http://www.thingiverse.com/thing:217494 X-axis idler pulley (for GT2 belt, inner bore is 4 mm, OEM pulley has 15 teeth but that might not matter)
Stepper motor driver 1. From Uncle Chuck’s On this page: http://www.unclechucks3dprinterstuff.com/catalog%20parts%2013.htm • Standard Stepper Motor Driver • Item # CSMB - 01 $10.45 Voltage regulator (DC/DC converter) 1. From Dig-Key (the pinout is not the same as the OEM regulator) http://www.digikey.com/product-detail/en/OKI-78SR-5%2F1.5-W36-C/811-2196-5-ND/2259781 $4.30 + shipping 2. From MPJA (this is very large and must be mounted away from the PCB) [this works on the Rep 1 --CLF] http://www.mpja.com/DC_DC-Converter-18-36VDC-In-5VDC-Out/productinfo/19320%20PS/ $4.95 + shipping Z-arm stiffeners 1. From Home Zillions [these work on the Rep 1 --CLF] http://www.ebay.com/itm/Home-Zillions-Platform-Hanger-MakerBot-Replicator-1-1-dual-2-2X-3D-Printer-RED-/271435645223 $42.00 + $10.00 shipping 2. From Performance 3D https://www.p3-d.com/collections/replacements-parts $54.99 + shipping 3. From BC (these are replacement arms, not stiffeners) http://www.bctechnologicalsolutions.com/arm-upgrade/index.html $150.00 + shipping |
Revert | |
| 20 | cfastie |
January 24, 2016 01:55
| over 8 years ago
Replicator 1 Dual Parts and Upgrades This is a list of suppliers (with links and/or part numbers) for drop in replacements or upgrades for the MakerBot Replicator 1 Dual 3D printer. Most of the parts listed currently are probably not correct, but are the closest I could find. I am initialing my approval [ --CLF] if I think the part is appropriate for the Rep 1. Feel free to do the same. Please add a note if an entry is obviously not appropriate for the Rep 1 Dual. If MakerBot is the only source for a part, please note that. If some parts require a modification to work with the Rep 1 Dual, please describe the modification. Extruder upgrade (filament drive block to replace the OEM Delrin plunger system) 1. From Devilsinthedetails [good for the Rep 1 --CLF] http://www.devilsinthedetails.ca/ $100.00 + shipping 2. From MakerBot (this is just the hardware if you 3D print the block parts. Is this Rep 2 version good for the Rep 1?) http://store.makerbot.com/catalog/product/view/id/358/category/22/ $15.00 + shipping 3. Models on Thingiverse for printing the block http://www.thingiverse.com/thing:53125 (This one from MakerBot) http://www.thingiverse.com/thing:435912 http://www.thingiverse.com/thing:70306 http://www.thingiverse.com/thing:231310 Extruder fan [these are good for the Rep 1 --CLF] 1. From MakerBot http://store.makerbot.com/catalog/product/view/id/419/category/22/ 6.50 + shipping 2. From RobotShop http://www.robotshop.com/en/replicator-2-2x-extruder-cooling-fan.html $6.99 + shipping Thermocouple (Are these all for the Replicator 2/2x?) 1. From Wanhao 1 m long, lug on one end for mother board http://wanhaousa.com/collections/hotend-parts/products/thermocouple $14.00 incl shipping 2. From Fargo 3D Printing MakerBot OEM replacement for Replicator 2 http://www.fargo3dprinting.com/products/makerbot-replicator-2-thermocouple/ $45.00+ $2.00 shipping 3. From Performance 3D for Replicator 2/2x http://www.p3-d.com/products/replicator-2-2x-thermocouple $44 (solid wire), $66 (stranded wire), $2 to $5 shipping Heater element (These all seem to be for the Rep 2/2x)
Specs for Replicator 1 dual: 24V 40-45W cartridge, ¼ inch diameter exactly
1. From Wanhao
http://wanhaousa.com/collections/hotend-parts/products/heating-core Ceramic insulation tape 1. From Fargo 3D http://www.fargo3dprinting.com/products/makerbot-replicator-2-ceramic-insulation-tape/ $3.95 cut to fit Replicator 2, $20.00 for 6 Extruder spring for upgraded filament drive 1. From McMaster Carr part: 94125K612 [this works one the Rep 1 --CLF] http://www.mcmaster.com/mv1452544250/#catalog/121/1264/=10ny9ce $10.36 pkg of 6 + shipping Extruder nozzles (generally we want 0.4mm MK8 nozzles) 1. From Performance 3D [good of the Rep 1 --CLF] http://www.p3-d.com/collections/duraplat-3d-extruder-nozzles $13.49 + shipping Replacement hot end 1. From RobotShop (these are for Rep 2, I don’t know if they work on Rep 1) http://www.robotshop.com/en/replicator-2-hot-end-assembly-w--stranded-thermocouple.html $130.99 + shipping X-end stop cable 1. From Uncle Chuck’s On this page : http://www.unclechucks3dprinterstuff.com/catalog%20parts%2011.htm • Cable - Stop Switch To Motherboard • Item # CCSS - 01 $9.75 X-axis cable 1. From Uncle Chuck’s On this page: http://www.unclechucks3dprinterstuff.com/catalog%20parts%2011.htm • Cable - Motherboard to Stepper Motor • Item # CCSM - 01 $11.75 2. Alternate solution for x end stop cable and x-axis cable http://www.thingiverse.com/thing:217494 X-axis idler pulley (for GT2 belt, inner bore is 4 mm, OEM pulley has 15 teeth but that might not matter)
Stepper motor driver 1. From Uncle Chuck’s On this page: http://www.unclechucks3dprinterstuff.com/catalog%20parts%2013.htm • Standard Stepper Motor Driver • Item # CSMB - 01 $10.45 Voltage regulator (DC/DC converter) 1. From Dig-Key (the pinout is not the same as the OEM regulator) http://www.digikey.com/product-detail/en/OKI-78SR-5%2F1.5-W36-C/811-2196-5-ND/2259781 $4.30 + shipping 2. From MPJA (this is very large and must be mounted away from the PCB) [this works on the Rep 1 --CLF] http://www.mpja.com/DC_DC-Converter-18-36VDC-In-5VDC-Out/productinfo/19320%20PS/ $4.95 + shipping Z-arm stiffeners 1. From Home Zillions [these work on the Rep 1 --CLF] http://www.ebay.com/itm/Home-Zillions-Platform-Hanger-MakerBot-Replicator-1-1-dual-2-2X-3D-Printer-RED-/271435645223 $42.00 + $10.00 shipping 2. From Performance 3D https://www.p3-d.com/collections/replacements-parts $54.99 + shipping 3. From BC (these are replacement arms, not stiffeners) http://www.bctechnologicalsolutions.com/arm-upgrade/index.html $150.00 + shipping |
Revert |