Public Lab Wiki documentation



Makerbot machine logs

This is a revision from March 08, 2015 23:28. View all revisions
8 | 58 | | #10016

MakerBot.jpg

The status of Public Lab's 10 MakerBot Replicators.


  • Public Lab office #1, Propeller Workspace, 4035 Washington Ave, New Orleans, LA
    • Contact: Stevie Lewis stevie at publiclab dot org
    • SN______ on loan
      • Build hours:
      • Projects:
      • Maintenance:
        • The 5 volt power upgrade has been performed.
        • Not the delrin plunger drive mechanism.

  • Public Lab office #2, Propeller Workspace, 4035 Washington Ave, New Orleans, LA
    • Contact: Stevie Lewis stevie at publiclab dot org
    • SN: 11833 (Brooklyn)
      • Loan log
        • out 03/02/2015 to Dan Henry dhenry at gmail dot com
    • F/W: MightyBoard v7.3
      • Build hours on 03/08/2015: 168 hours
      • Projects:
        • Demonstrations at New Orleans public libraries for Teen Tech Week 2015
      • Maintenance:
        • The 5 volt power upgrade has been performed.
        • Not the delrin plunger drive mechanism.

  • Makerspace, Mobile, Alabama
    • Contact: Stevie Lewis
    • SN _____ not operational
      • Build hours:
      • Projects:
      • Maintenance:
        • The 5 volt power upgrade has been performed.
        • Not the delrin plunger drive mechanism.

  • Picayune, MS
    • Contact: Dan Beavers: danbeavers at organizers dot publiclab dot org
    • SN 000J
    • S/W version: Sailfish Replicator1 v 7.6
    • Build hours: 135 as of mid Feb 2015
    • Projects:
      • Demonstrations at the Picayune library the first Thursday of the month.
      • Printing miscellaneous parts for local FIRST robotics team number 1421.
    • Maintenance:
      • Arrived with both extruders upgraded to the spring loaded roller type (no delrin plungers).
      • Left extruder inoperable due to cable break is now fixed.
      • The 5 volt power upgrade has been performed.
      • Front panel controls tilted.
      • Not the delrin plunger drive mechanism.

  • Geography Department, University of Kentucky
    • Contact: Jessi Breen
    • SN______ not operational
    • Build hours:
    • Projects:
    • Maintenance:

  • Public Lab office, Pfizer building, 630 Flushing Avenue, Brooklyn, NY
    • Contact: Liz Barry
    • Operational
    • Build hours:
    • Projects:
      • smart phone specs.
    • Maintenance: overall upgrade on Feb 4, 2015 by Aaron who runs Parsons 3d print lab.
    • note: there are three other models of 3d printers in this space

  • Parts and Crafts, Sommerville, MA
    • Contact Katie and Will
    • SN_____
    • Build hours:
    • Projects:
    • Maintenance:

  • Hackrfarm/University of Massachusetts
    • Contact: Ian Walls
    • SN_______
    • Build hours:
    • Projects:
    • Maintenance:

  • LEAFFEST HQ, Salisbury, VT

    • Contact: Chris Fastie whose gmail is cfastie
    • SN 11837
    • Build hours:

      • Initial build hours 12/2013: 11
      • build hours on 02/07/2014: 245
      • build hours on 08/18/2014: 640
      • build hours on 01/01/2015: 1000
      • build hours on 02/08/2015: 1200
        1000hours-563-4.jpg
    • Projects:

      • Prototyping camera rigs for aerial mapping
      • Experimenting with producing camera rigs for sale to Public Lab mappers
      • Prototyping spectrometer
    • Maintenance:
      UndExt-328-2.jpg

      • tightened all hex bolts holding plywood frame together 12/2014
      • upgraded firmware to Makerbot v. 7.5
      • broken fan replaced 12/24/2013
      • new nozzles installed 01/04/2014
      • 24v/5v regulator replaced 01/17/2014
      • Removed left nozzle so it could not keep knocking over my prints. 01/20/2014
      • Filament feed mechanism upgraded (all prints were failing) (MakerBot replacement parts for right extruder) 02/06/2014
      • Filament feed mechanism for left extruder printed and installed with MakerBot hardware 04/2014
      • Printed feet, spool holders, and LCD/keypad cover
      • lubricated noisy fan in motherboard compartment with SuperLube 06/2014
      • Replaced x-axis motor cable (all prints were failing) 08/18/2014
      • x-axis idler pulley is lubricated every week with SuperLube.
      • Installed new ball bearing x-axis idler pulley from Alm Gear ($18). 01/20/2015
      • Tightened all belts. 01/20/2015
      • Tightened all hex bolts holding plywood frame together. They were all loose again after 1000 hours of printing. 01/21/2015
      • Tightened both grub screws on all six pulleys. They all tightened, but I noticed no difference in performance. 01/29/2015
      • Removed the fan from the motherboard compartment. It is not needed for cooling (long story) and just makes noise. 02/11/2015

  • Public Lab retail fulfillment center, Portland, OR
    • Contact: Mathew Lippincott
    • SN 12328
    • Build hours:
    • Projects:
    • Maintenance:
      • 24v/5v regulator replaced 3/14
      • spool holders replaced
      • indicator LEDs disconnected to prevent voltage damage to board by motors.