validity
validity


Author Comment Last activity Moderation
warren "OK, update - since the B sensor was covered yesterday, it's now showed as "downgraded" just as the A was yesterday: My question now, is apart fr..." | Read more » almost 5 years ago
warren "OK! After now blocking the B sensor instead, it's accepting A data once more, and hasn't yet flagged the B sensor. Interesting! " | Read more » almost 5 years ago
warren "Aha! One day later, my sensor A has been "downgraded"! I'll move the tape to the other sensor and see what happens. " | Read more » almost 5 years ago
warren "i'll post more soon, but one is now totally blocked and it shows on the graph, but it's not rejecting the data. I'll let this run for a day. Then ..." | Read more » almost 5 years ago
warren "OK, i covered it more thoroughly and will wait a while to report back on what happens. " | Read more » almost 5 years ago
warren " OK testing this out now. Here's our sensor, on Cromwell St at our office: https://www.purpleair.com/map?582419|582421#13/41.81161/-71.41883 Note ..." | Read more » almost 5 years ago
warren "This is great, thanks @kkoerner -- and interesting to see that they'll flag sensors. I wonder how much two would have to not correlate before it go..." | Read more » almost 5 years ago
kkoerner "So from my experience they're used primarily as a sanity check. I'm not sure of the math behind it, and since PA removed the R2 values that used to..." | Read more » about 5 years ago
warren " @julieta @nanocastro have either of you used 2 sensors in your DIY #plantower -based devices? #maca etc? " | Read more » about 5 years ago
warren "And just linking to here, where the wiki page documents the 2 channels, which i would guess are from the 2 sensors? https://publiclab.org/wiki/purp..." | Read more » about 5 years ago
warren "@CBarnes9 @samr @Tomp @OrionAllgaier @wu_ming2 @guolivar @BrandonFeenstra @kkoerner, any thoughts or info to share on exactly what the #purpleair d..." | Read more » about 5 years ago