| Author | Comment | Last activity | Moderation | ||
|---|---|---|---|---|---|
| warren | "I think it will work! It doesn't seem like the width of the stage is that important. " | Read more » | over 6 years ago | |||
| j-bower | "Yes, for sure. I need to double check on the plywood I have lying around - pretty sure it’s 1/4 inch. There’s also lots of scrap. I noticed you lis..." | Read more » | over 6 years ago | |||
| warren | "I heard you also have a lasercutter? These new files for the stage can be cut pretty easily by hand or by lasercutter -- would you be able to send ..." | Read more » | over 6 years ago | |||
| j-bower | "Of course! Thanks for the link, and thanks Richard! " | Read more » | over 6 years ago | |||
| warren | "@j-bower, thanks for offering to help print these! " | Read more » | over 6 years ago | |||
| warren | "@j-bower -- Richard Bowman has taken a stab at a combined lens mount for v1 and v2 cameras! https://github.com/rwb27/openflexure_microscope/issues/..." | Read more » | over 6 years ago | |||
| cfastie | "If that model is modified to allow for the components and the ribbon, it should be done so the new underside surfaces are not horizontal. FDM print..." | Read more » | almost 7 years ago | |||
| warren | "Although that's not the right piece -- we actually need the wider adapter; i think Richard was just saying he thought the camera interface was modi..." | Read more » | almost 7 years ago | |||
| warren | "Richard from OpenFlexure has proposed this piece, although I'm not sure it's compatible with both cameras -- https://github.com/rwb27/openflexure_m..." | Read more » | almost 7 years ago | |||
| warren | "Just as a price reference, Thingiverse offers a kind of crowdsourced printing service and various services seem to offer about $12 as a quote for t..." | Read more » | almost 7 years ago | |||
| warren | "There seems to be a small piece that sits under the camera too! http://partsandcrafts.org/pi_microscope/picam2_lens_gripper.stl That would be ama..." | Read more » | almost 7 years ago | |||
| cfastie | "There is one part at Thingiverse. Is that the only one you need printed? The part at Thingiverse has a flat horizontal lower surface which could ca..." | Read more » | almost 7 years ago | |||
| warren | "I posted this on Thingiverse too! https://www.thingiverse.com/thing:2820427 " | Read more » | almost 7 years ago | |||
| cfastie | "The first two times I tried the Rev. P wind sensor, I also tried the Rev. C sensor. The Rev. C sensor did not work as well as the Rev. P, so I focu..." | Read more » | almost 7 years ago | |||
| cfastie | "It’s fairly straightforward to use the Modern Device Wind Sensors with either a Mini Pearl Logger or a Nano Data Logger. I had great success with t..." | Read more » | almost 7 years ago | |||
| warren | "@cfastie, what do you think? The AREN folks are asking us for some that'd be relatively quick to plug in and start logging on a kite, that could be..." | Read more » | almost 7 years ago | |||
| Bronwen | "You can also take a look at our checklist (a starting place for anyone interested in participating in the Community Kits initiative) here! " | Read more » | almost 7 years ago | |||
| warren | "We'll be posting more on this soon, but the very first steps are to be sure your project is posted on PublicLab.org on a wiki page -- like these ex..." | Read more » | about 7 years ago | |||
| warren | "I love this page on the CLEAR website, posted by @maxliboiron: https://civiclaboratory.nl/2017/04/26/clear-guidelines-for-designing-equitable-scie..." | Read more » | about 7 years ago |