I converted this camera (Ixus 40). It was fairly easy to do; but after reassembling I saw that it wouldn't focus. I eventually ended up adding a couple of pieces of very thin glass (where the IR blocking filter was) to get the focus back. I'm thinking of doing another camera, but would prefer to do one that will focus without further modifications. Can anyone tell me which camera(s) do not need modification after removing the IR blocker?
Thanks,
..... john
6 Comments
It is common for focus to be poor after the internal IR cut filter is removed or replaced. To make those modifications, the plate holding the camera sensor must be removed by unscrewing a few small screws. The tightness of those screws determine the position of the sensor which is critical to focus. Unless a thick filter is installed to replace the IR cut filter, it is almost always possible to adjust those screws so the camera focuses well again. More here: https://publiclab.org/notes/cfastie/01-19-2015/filters-in-focus
Chris
Reply to this comment...
Log in to comment
Hi Chris, So, most cameras can be refocused that way? .. john
Is this a question? Click here to post it to the Questions page.
Reply to this comment...
Log in to comment
It seemed to work for the eight models of PowerShot that I tried. I am not aware of other attempts to confirm this.
Reply to this comment...
Log in to comment
Thank you both for your help. ..... john
Reply to this comment...
Log in to comment
Thanks again for your help Chris. ... john
Reply to this comment...
Log in to comment
Hi, I just wanted to say that I add two pieces of microscope slide cover, the same size as the IR blocker, and I now have my focus back. Thanks for your help. ...... john
Reply to this comment...
Log in to comment
Login to comment.