Public Lab Wiki documentation

  • 0

Spectral Workbench API v1

The v1.0 Spectral Workbench API has been deprecated; for up-to-date documentation, please see the Spectral Workbench API page


The API (starting with the macro system, below) will make it possible for anyone to develop new functions, like:

  • displaying a set of wavelengths (and their intensities) for, say, a contaminant you're looking for
  • displaying a ratio of wavelength x to wavelength y -- say, for normalized differential vegetation index (NDVI)
  • display intensity at 600nm and indicate intensity at 600nm for the last 10 measurements
  • calling up, averaging, and displaying the average of all spectra tagged with "oliveoil" or whatever
  • graph intensity at wavelength X over time, for the past Y weeks
  • save spectra periodically
  • develop a better spectrum matching function (find nearest match)
  • make a function which can auto-recognize a CFL spectrum and offer to auto-calibrate


We're building a simple API so people can write macros without a lot of fuss. There are 2 places to use macros - in the "Analyze" interface and in the "Capture" interface. The former is for performing operations on existing data, the latter for manipulating data while actually using your spectrometer. Both use the same library and have access to many (but not all) of the same functions.

A simple macro saving and sharing system is now live at:

Getting started

To create a macro we have a simple editor you can enter JavaScript code into. The basic template (copy paste this and build on it!) is like this:

setup: function() {
    // code to run on startup
    $W.add_button("My Button",function(){ do_something() })
  draw: function() {
    // code to run every frame

If you are already logged into Spectral Workbench, you can begin by clicking here:

A very simple command to run in the macro console (works as of Oct 14 2012) would be:

setup: function() {$W.canvas.toDataURL(),'_newtab').focus()}

Which opens a new tab with the current image data as a PNG. For now, you can use any of the below variables and methods in a Javascript console such as found in Chrome, Safari, or Firebug on Firefox.

Variables and methods

A range of variables and methods will be available to use in your macros. To start with, you can read through the existing framework here:

  • $ - returns a nested array of wavelength/intensity pairs, as floats and integers between 0-255, respectively. Example to come; intensities are separated by R, G, and B channels.
  • $W.mode - "rgb" or "average", i.e. whether we're currently looking at color channel data or the averaged "monochrome" data
  • $W.markers - an array of markers at certain wavelengths, as input by the user. Later we'll make it easy to add new markers (see upcoming section below)
  • $W.notify(string msg,string type,boolean expire) - alert the user with a message (msg) of type "notify", "warning" or "error" shown in green, yellow, or red respectively. Defaults to expire = true, which means it disappears after 2 seconds.
  • $W.getIntensity(obj data,int x) - Get the intensity from 0-255 for a given x-position in the video frame. Use as follows:

    $W.getIntensity($[0].data,200) // fetches intensity for x-position of 200 px

  • $W.calibrate(id,x1,w1,x2,w2) - calibrates the spectrum with id id, using wavelength/pixel pairs. Integer x1 is a position in the x-axis of the spectrum image (origin left) with a known wavelength position of (decimal) w1. x2 and w2 follow the same convention and the two positions are used to linearly interpolate the calibration. Note that this occurs only on the server side, and if you have loaded a spectrum, it will not reflect the new calibration until you re-load it from the server.

  • $W.saveSpectrum() - saves the current spectrum of data and brings up the Save dialog.
  • $W.getWavelength(int col) - returns wavelength as a decimal for the x-axis position given in "col"
  • $W.toggle_mode() - switch from "rgb" to "average" mode or back
  • $W.show_rgb() - switch from "average" to "rgb" mode
  • $W.show_average() - switch from "rgb" to "average" mode
  • $W.add_spectrum(int id) - fetches data from a spectrum with the given ID, and displays it in the graph for comparison
  • $W.excerptCanvas() - returns a PNG (data url) of the current waterfall display image
  • $W.getCrossSection() can now be overwritten to collect a different cross section of the raw video feed: You basically get a frame from the video, and need to source from it to write a new row of pixels onto the top row of the waterfall display.
  • $W.mark() - currently for capture interface only, which we should change to be for analysis as well - add a new marker to monitor the intensity at this wavelength. Uses prompt() so requires user interaction, which we should also change.
  • $W.dialog(title,body,[) - for analyze only -
  • $W.calibrated - analyze only - true/false, whether the spectrum is calibrated. Calculated at page load time, so if it's been done through a macro and the page hasn't loaded, don't trust it. Conversely, if you are writing macros, and you calibrate, update this value to reflect that!

Saving client-side processed data

You should also be able to manipulate the JSON representation of data on the client side and save it to the server using the following URL format:<id>/save

where <id> is the spectrum ID, and the request includes POST parameters:

  • tags - an optional comma-delimited series of tags
  • data - an optional JSON array of data, in the format Spectral Workbench provides it (see RESTFUL JSON download below)

Upcoming variables and methods

  • $W.add_button(string label,function action) - adds a new button to the interface which has the given label and triggers the given action


Please add your own if you like:

Saving image data offline

software spectral-workbench development spectral-workbench-api