Public Lab Wiki documentation



Kite Mapping Tips

This is a revision from April 16, 2014 20:14. View all revisions
2 | 14 | | #10321

« Back to Kite Mapping

10 tips for trouble-free kite mapping

Note: This is NOT a guide for expert kite flyers. It's intended to be a QUICK START guide for people who've never kite mapped before, with as few problems and things to worry about as possible.

Equipment & Conditions

Wind - don't fly balloons if it's windy; don't fly kites if it's calm or very strong!

0 mph 5 mph 10 mph 15 mph 20 mph
balloon either 9 ft kite 7 ft kite don't fly

Kite selection - use delta kites: regular, simple triangular kites as pictured below. Nine foot (2.7m) wide for light wind, seven (2m) for stronger winds

Use a tail - put a 20 foot long FUZZY TAIL (ribbony, as seen here) on your kite. It will keep it stable and stop it from diving.

kite-tail-2.jpg

Launch & Flight

Use gloves - made of cloth or leather for string burns. No rubber!

Keep tension on the line - if it pulls, let it out as fast as you can.

Do a test flight - with no camera, to test the conditions

Use ALL your string - fly high! 1000-2000 feet: one large photo of your whole site is far better than 20 you'll have to stitch together later!

Running is unnecessary - quickly get your kite up into strong, clean air: have someone release it upwards with 100 feet of tensioned line while walking upwind slowly.

kite-launch.jpg