Public Lab Wiki documentation



Infragram Point & Shoot

This is a revision from July 01, 2014 15:50. View all revisions
4 | 41 | | #10634

« Back to Infragram

Installing config file

If your camera did not ship with a config file or you are using a new SD card, follow these steps to get your Infragram Point & Shoot to take properly white-balanced images, necessary for post processing at Infragram.org. This is also relevant for anyone who has a Mobius Action Cam and wants to script or customize its settings.

Note: The WB setting in the config file probably has to be changed to "8" for the cameras which will be shipped from our Kickstarter or our store.

  1. turn the camera on pressing "Mode" until the red light blinks 3 times (5-6 secons) to generate a config
  2. plug it in
  3. replace with this in the home directory
  4. repeat turn on pressing mode.

SYSCFG.TXT

Updating firmware

http://www.rcgroups.com/forums/showthread.php?t=1904559