Public Lab Research note


The user 'dhaffnersr' has been placed in moderation and will not be able to respond to comments.
  • 3

Raman spectrometer in operation (sort of)

by dhaffnersr |

What I want to do - develop a simple raman spectroscope that the public lab spectrometer kit can pick up the signal.

My attempt and results - so far I have come up with a focusing lens that uses a 10 X objective eye piece from a microscope coupled in a barlow lens with the barlow optics bored out and replaced with a laser collimator lens.

Questions and next steps - the only real problem with this set up is getting the laser pointer angle just right, so many small adjustments have to be made both with the laser and focal lens, very frustrating, but it does seem to work, some of my spectral results are up.

I am working on a more solid state design in an enclosure using cuvettes which is more appropriate.

20160125_104817.jpg

20160125_104833_(1).jpg

20160125_104833.jpg

20160125_105048.jpg

20160125_105112.jpg



spectrometer multispectral collaboration field-test spectralworkbench laser-cut idealab raman laser spectra publiclaboratory laboratories testing spectral-analysis spectroscope laboratory cheap filter-switcher publiclab green-line raman-spectroscopy chemical raman-spectrometer green pointer homemade chemistry


1 Comments

Any further work on your raman setup using the Public Lab spectography kit? I'm interested in a similar setup for geological samples and gemstone ID. 1504374520629.jpg

Is this a question? Click here to post it to the Questions page.


You must be logged in to comment.