Public Lab Wiki documentation



reconfigurable-rig

This is a revision from August 25, 2016 18:15. View all revisions
1 | 6 | | #13395

Reconfigurable Rig

This aerial photography rig was designed by @Ranon Prichard as an Autodesk Student Expert Intern project funded by Autodesk.

The goal is to create an affordable yet versatile rig that can be reconfigured in a number of ways for use in pole, balloon and kite aerial photography in several configurations. The parts are primarily laser cut, or regularly available hardware store parts.

Research notes on the rigs and their usage are tagged reconfigurable-rig. Please post your research.

The parts, 3D printing and laser cutting files, and assembly instructions are available in the Reconfigurable Rig Github repository.

About the Development

RubberBandUsage.png

The rig features a rubber band powered pan mechanism which uses a pipe fitting filled with silly putty as resistance, inspired by a design by Simon Harbord. More details in this note.. Electronics free alternatives to the Silly Putty panning mechanism are explored here.

The rig was inspired by Tinker Toy type connectors, and the use of beverage tubing in KAPtery rigs. The use of cable clamps and 2D parts to make Tinker Toy-like pieces enables the parts to be produced via laser cutting for more affordable kits.

More configurations for pole photography are explored here.