Public Lab Wiki documentation



Use a DIY spectrometer from Public Lab

This is a revision from November 20, 2017 22:52. View all revisions
1 | 28 | | #15169

« Back to Spectrometry

If you've found your way here after cutting out a spectrometer from a magazine, welcome!

Introduction

This introductory kit (also available here, and more info here) has been co-designed by hundreds of contributors as an entry point to Public Lab's collection of Do-It-Yourself spectrometry projects.

It's not the most robust design, or the most precise. But it's specifically for newcomers to get started on -- a stepping stone on the way to bigger and better DIY designs like the Desktop Spectrometry Starter Kit and many more. This broader initiative is still actively under development by thousands of people coordinating their work across the open Public Lab community! Read more about our challenges we're tackling, as well as the limitations and goals of our designs.

Once you've assembled it (a task in itself!) and noted any ideas for improving it, take the next step by looking at a more advanced activity below.

Why we need you

We're especially interested in people pitching in to test out a new method for determining the concentration of a water sample. We'll post this activity soon and would deeply appreciate your help in testing it out and troubleshooting!

(more coming soon)


About Public Lab

Public Lab is a network of thousands of people around the world, working together to:

  • collectively understand and address environmental problems that affect people
  • develop and share more accessible, affordable, and open source ways to monitor these issues
  • support one another as a community to achieve these goals

Anyone may join in -- to take the first step, find a question or project you're interested in, and share your thoughts!


Quick start

If you're ready to jump right in, and have already cut out your spectrometer,

Click here to start assembling it

Then circle back to the activities listed below.

Goals

How can you help? The first thing we're looking for help with is refining this new version of the foldable spectrometer design. We're hoping it'll be stronger, easier, and more intuitive to use than its predecessor, as well as easier to duplicate (you can just copy it onto stiff paper with a laser printer/copier).

To try out the new design and provide feedback, please leave a comment on the assembly instructions, or ask a question on this page

SNOWFEST-339-32a.jpg

(Above: comparing two samples illuminated by an ultraviolet laser -- image by @cfastie)


Getting started

Before tackling a bigger project, here are some introductory activities geared at helping you build a spectrometer, troubleshoot it, and upload data for comparison:

Purpose Category Status Author Time Difficulty Replications
Build a papercraft spectrometer for your phone -- version 2.0 - - @warren - - 2 replications: Try it »
Calibrate your spectrometer in Spectral Workbench verify review-me @warren 15m easy 5 replications: Try it »
Assemble a DIY Papercraft Spectrometer build complete @abdul 10min introductory 3 replications: Try it »
Reduce light inside foldable PL spectrometer - - @xose - - 0 replications: Try it »
Scan and compare different gases (in discharge tubes, like neon) using a DIY spectrometer - - @warren - - 27 replications: Try it »
Make a narrow slit for a DIY spectrometer out of paper - - @warren - - 0 replications: Try it »
See the Fraunhofer absorption lines in sunlight verify draft @warren 1h easy 4 replications: Try it »
Draft: Find the concentration of a liquid with a DIY spectrometer - - @warren - - 0 replications: Try it »

Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.

Activities

These are more advanced activities for after you've gotten up and running with the starter activities above.

Purpose Category Status Author Time Difficulty Replications
Detection of Added Sugar in Red Wine Using Visual Light Spectroscopy - - @ygzstc - - 0 replications: Try it »
Build a papercraft spectrometer for your phone -- version 2.0 - - @warren - - 2 replications: Try it »
Detecting Pesticides in Organic and Conventional Raspberries using Open Source Instrumentation - - @silverhammer - hard 0 replications: Try it »
Flame testing metal salts observe - @kgradow1 3h medium 0 replications: Try it »
Multi parameter analysis using a DIY Spectrometer - - @Frikkie - - 0 replications: Try it »
Calibrate your spectrometer in Spectral Workbench verify review-me @warren 15m easy 5 replications: Try it »
Detection of Olive Oil Adulteration (with Peanut Oil) Using Visual Light Spectroscopy - - @ygzstc 10h medium 0 replications: Try it »
PLab 3 Gain Correction - - @stoft - - 0 replications: Try it »
Tracking Plant Health Using Visible and Infrared Light -- Initial Experiences at an Arts High School - - @Travis - - 0 replications: Try it »
Desktop Spectrometry Starter Kit 3.0 Assembly Instructions build complete @abdul 45min introductory 1 replications: Try it »
Preparing a DVD-R to act as a diffraction grating - - @MrBumper - - 1 replications: Try it »
Assemble a DIY Papercraft Spectrometer build complete @abdul 10min introductory 3 replications: Try it »
Classroom Flame Spectroscopy - - @straylight - - 0 replications: Try it »
Using the Spectroscope for Analysis of Concentration (Beer's Law) test-limits - @straylight 3h medium 0 replications: Try it »
Scan and compare different gases (in discharge tubes, like neon) using a DIY spectrometer - - @warren - - 27 replications: Try it »
Water Quality Measurements with Optical Spectroscopy - under-development @philippg - - 0 replications: Try it »
Fat percent in milk - - @wagnerc4 - - 0 replications: Try it »
Make a narrow slit for a DIY spectrometer out of paper - - @warren - - 0 replications: Try it »
Revised 3D printable mini spectrometer - - @B-winters - - 0 replications: Try it »
Testing the Oil Testing Kit: identifying a "somewhat unknown" sample - - @warren - - 0 replications: Try it »
Light Amber - - @cfastie - - 0 replications: Try it »
Lycopene - - @cfastie - - 0 replications: Try it »
Spectrometer 3.0 Cuvette Add-on - - @programmer1200 - - 0 replications: Try it »
DIY-spectrometer episode 2 (using LEGO) - - @TakeshiMatsumoto - - 0 replications: Try it »
Fraunhofer - - @cfastie 30m easy 1 replications: Try it »
Draft: How to intergrate spectral data geometrically - - @madafe - - 0 replications: Try it »
WIP Raspberry Pi Spectrometry automation - - @jaksch - - 0 replications: Try it »
Importing spectra from NIST and WebMineral.com to Spectral Workbench - - @warren - - 0 replications: Try it »
Draft: Collect a sample for laboratory analysis - - @warren - - 0 replications: Try it »
Setup for UV Testing with Specrtrometer - - @JoshMc - - 0 replications: Try it »
Filtered tap H2O vs unfiltered tap H2O spectral graph comparison - - @Suiris - - 0 replications: Try it »
Introduction to Spectrometry (& Building a Spectrometer!) Lesson - - @mimiss - - 0 replications: Try it »
Attempt at Quantitative Analysis for Desktop Spectrometer - - @ben.alley43 - - 0 replications: Try it »
See the Fraunhofer absorption lines in sunlight verify draft @warren 1h easy 4 replications: Try it »
Noise by colour - - @viechdokter - - 0 replications: Try it »
Stress-testing the Desktop Spectrometry Starter Kit test-limits in-progress @warren 1h medium 0 replications: Try it »

Activities should include a materials list, costs and a step-by-step guide to construction with photos. Learn what makes a good activity here.


Questions

The easiest way to get involved is to simply ask questions!



Challenges

Once you've gotten a solid footing with some of the above activities, try tackling one of these unsolved challenges to advance our collaborative work:

Title Author Updated Likes Comments
How do I... @akhila over 3 years ago 13
Can the spectrometer or turbocharger be used for lal testing? @Ag8n almost 6 years ago 3
How can we detect contaminants in water samples with a DIY spectrometer using reagents? @warren over 6 years ago 1
Can a DIY spectrometer be used to measure water turbidity? @warren over 6 years ago 6
What's an easy way to compare two liquid samples with a spectrometer? @warren over 6 years ago 7
How do I collect a sample for laboratory analysis? @warren over 6 years ago 3
Desktop Spectrometry Kit to arduino? @jjoll over 6 years ago 5
Can a Spectrometer be used to detect material type? @jjoll almost 7 years ago 3
What are good containers to use for spectrometry samples? @warren over 7 years ago 1
Can I upgrade a DIY spectrometer with a Raspberry Pi camera? @warren over 7 years ago 10
Question: Can DIY-spectrometer be used for analysis of soil @interestedperson_ha over 7 years ago 7
Getting the spectrometer to work with a Raspberry Pi? @anjohn12 almost 8 years ago 6