_This draft wiki page is a work in progress!_
Wastewater is “used water” that’s created by households, cities, and industry. It ranges from sewage to surface runoff that can flow from roadways into storm drains. Untreated or under-treated wastewater can contain a variety of pollutants that can harm people and ecosystems when it’s released into the environment. On this page, we’re collecting information on some of the clues that might indicate wastewater pollution in the environment, and ways to investigate them. Some methods assess general water quality conditions that can correlate with wastewater pollution, while other methods can more directly signal the presence of wastewater by identifying specific pollutants.
## Detecting possible wastewater pollution There’s lots of information (in English and Spanish) about what to look for in the comments of this question: [What are some observable tell-tale signs of wastewater pollution?](https://publiclab.org/questions/bhamster/07-28-2021/what-are-some-observable-tell-tale-signs-of-wastewater-pollution) If you’ve tried any of the approaches below to detect or document wastewater, please share your experiences and post a research note!
### Change in water color or clarity _**Why?**_ Solid particles, chemicals, or microscopic organisms in wastewater can give it a color or cloudy appearance. When wastewater is discharged into the environment, you might see a discolored plume in a river or a colored residue on land. turbid wastewater in a stream _Cloudy looking stream water, [Sustainable Sanitation Alliance](https://www.flickr.com/photos/gtzecosan/3027633774/in/photostream/), [CC BY](https://creativecommons.org/licenses/by/2.0/)_
_**METHODS:**_ #### Documenting visual changes in water color or clarity [notes:grid:wastewater-color] + [Aerial photography](https://publiclab.org/wiki/aerial-photography) and satellite imagery NYC Flushing Bay CSO _Satellite image showing discolored, cloudy water in the Gowanus Canal. From [this slideshow](https://storage.googleapis.com/publiclab-production/public/system/images/photos/000/003/335/original/2014_3_17_Flushing_Bay_Water_Quality_Study_Notes.pdf) by @eymund._
#### Documenting changes in water color/clarity with spectral imagery (might not be visible to human eyes) + [Infrared balloon image reveals Gowanus plume](https://publiclab.org/notes/liz/8-3-2011/ir-reveals-gowanus-plume), and note [this comment](https://publiclab.org/notes/liz/8-3-2011/ir-reveals-gowanus-plume#c9960) that the plume is likely flowing sewage sludge that shows up in the near-infrared range because of the bacteria and small algae in the sludge. + Multispectral analysis of satellite images: like in the paper, “[Tracking stormwater discharge plumes and water quality of the Tijuana River with multispectral aerial imagery](http://oceani.com/PDF/Tracking%20stormwater%20discharge%20plumes.pdf),” by Svejkovsky et al. 2010. Gowanus plume _Visible and near-infrared photos composited to reveal a plume of flowing sewage scum, originally from [this note](https://publiclab.org/notes/liz/8-3-2011/ir-reveals-gowanus-plume) by @liz._
#### Measuring turbidity of water Solid particles floating throughout the water (called suspended solids) increase its turbidity. Learn more about turbidity in [this research note](https://publiclab.org/notes/anngneal/12-08-2017/7-ways-to-measure-monitor-and-evaluate-water-quality#7.+Assessing+the+Turbidity,+TSS+and+Clarity) from @anngneal. + The [turbidity wiki page](https://publiclab.org/wiki/turbidity) has a list of sensors and other tools that enable physically measuring turbidity + [Question: How do I choose a method for monitoring turbidity?](https://publiclab.org/questions/stevie/03-21-2018/how-do-i-choose-a-method-for-monitoring-turbidity) Secchi diskSimple turbidity sensor _Left: Secchi disk for measuring turbidity, from [this note](https://publiclab.org/notes/anngneal/12-08-2017/7-ways-to-measure-monitor-and-evaluate-water-quality) by @anngneal. Right: Simple turbidity sensor prototype, from [this note](https://publiclab.org/notes/wmacfarl/11-11-2019/building-the-simple-turbidity-sensor-prototype) by wmacfarl._
[activities:turbidity]
### Odor _**Why?**_ Clean water should have no smell or a slightly earthy smell. Other smells could indicate under-treated wastewater. See [this comment](https://publiclab.org/questions/bhamster/07-28-2021/what-are-some-observable-tell-tale-signs-of-wastewater-pollution#c29094) from @jesseslone about odors near wastewater discharge areas and what they might indicate. _**METHODS**_ Methods and activities related to odor logging can be found here: [https://publiclab.org/methods#odor](https://publiclab.org/methods#odor) [activities:odor]
### Changes in water temperature _**Why?**_ Wastewater can be warmer than the waterbodies it’s dumped into. This includes sewage and wastewater produced from industrial processes. _**METHODS**_ #### Thermal fishing bob Sense changes in water temperature and display temperature differences with colored lights in the field. Take a long-exposure photograph to record the results! thermal fishing bob _A long-exposure photograph of colored lights on a thermal fishing bob towed in the Charles River, Boston. The different colors indicate differences in water temperature near a power plant, which releases heated wastewater into the river. From [this note](https://publiclab.org/notes/Sara/06-13-2014/successful-thermal-fishing-bob-test-mapping-the-kendall-power-plant-thermal-plume) by @Sara._
+ About the thermal fishing bob and how to make one: [https://publiclab.org/wiki/thermal-fishing-bob](https://publiclab.org/wiki/thermal-fishing-bob) + [Successful Thermal Fishing Bob Test: Mapping the Kendall Power Plant Thermal Plume](https://publiclab.org/notes/Sara/06-13-2014/successful-thermal-fishing-bob-test-mapping-the-kendall-power-plant-thermal-plume) [activities:thermal-fishing-bob] #### Thermal photography + [https://publiclab.org/wiki/thermal-photography](https://publiclab.org/wiki/thermal-photography) + Detecting warmer water at wastewater outfalls with thermal photographs, as noted on pg. 27 of [this guide for municipalities detecting illicit discharges of wastewater](https://www.neiwpcc.org/neiwpcc_docs/iddmanual.pdf) [activities:thermal-photography]
### Conductivity _**Why?**_ Water that has more inorganic solids dissolved in it (like salts or chemical pollutants) generally conducts electricity better---it has a higher [conductivity](https://publiclab.org/wiki/common-water-contaminants#Conductivity). For example, salty wastewater (brine) associated with fracking can cause a spike in water conductivity (source: [FracTracker](https://www.fractracker.org/projects/water-monitor/intro/)). Organic pollutants like oil, however, don’t generally conduct electricity well and may lower the conductivity of water. >“A failing sewage system would raise the conductivity because of the presence of chloride, phosphate, and nitrate; an oil spill would lower the conductivity.” - [US EPA](https://archive.epa.gov/water/archive/web/html/vms59.html) _**METHODS**_ [https://publiclab.org/methods#conductivity ](https://publiclab.org/methods#conductivity) Two examples: + [Coqui audible water conductivity sensor](https://publiclab.org/wiki/coqui) [activities:coqui] + Riffle open source water monitor: [https://publiclab.org/wiki/riffle](https://publiclab.org/wiki/riffle), with some [ongoing questions here](https://publiclab.org/notes/donblair/01-07-2016/conductivity-sensing-open-questions) [activities:riffle]
### Indicator chemicals or components _**Why?**_ The presence of certain chemicals or living things in water can suggest pollution from wastewater. _**METHODS**_ #### Detecting optical brighteners [notes:wastewater-optical-brighteners] optical brighteners _UV light makes a tampon exposed to optical brighteners glow brightly. In the positive control on the right, the tampon was soaked in laundry detergent. From [this note](https://publiclab.org/notes/alejobonifacio/08-04-2021/como-detectar-abrillantadores-opticos-aguas-residuales-yendo-a-un-rio-how-to-detect-optical-brighteners-wastewater-going-to-a-river) by @alejobonifacio._
#### Organic waste and oxygen Certain bacteria help to clean water by breaking down organic wastes, and they use oxygen in the process. Measuring the amount of oxygen in water and how readily it might be used can help create a picture of how much organic waste is present and how well it’s breaking down. + [Monitor transparency, dissolved oxygen, ORP, and ammonia from a river](https://publiclab.org/notes/shanlter/07-03-2017/monitor-transparency-dissolved-oxygen-orp-and-ammonia-from-a-river), by @shanlter. + [Live Dissolved Oxygen and Redox Potential Sensor](https://publiclab.org/notes/jesseslone/04-10-2017/live-dissolved-oxygen-and-redox-potential-sensor), by @jesseslone. Using dissolved oxygen and oxidation-reduction potential (ORP) as a proxy for [biochemical oxygen demand](https://www.usgs.gov/special-topic/water-science-school/science/biological-oxygen-demand-bod-and-water?qt-science_center_objects=0#qt-science_center_objects), a common indicator of organic waste pollution measured by wastewater treatment plants. + There are also ways to use spectroscopy to detect organic matter (see below) DIY DO and ORP sensor _Do-it-yourself dissolved oxygen (DO) and oxidation-reduction potential (ORP) sensor for monitoring a small wastewater treatment system. From [this note](https://publiclab.org/notes/jesseslone/04-10-2017/live-dissolved-oxygen-and-redox-potential-sensor) by @jesseslone._
#### Bioindicators and bioassays Using living things to help indicate or measure impacts from polluted water. Changes in the survival or growth of certain plants, animals, and microorganisms in water can indicate worsening water quality. + Sampling water and looking for microscopic organisms as living indicators (called bioindicators) of possible wastewater pollution, with the help of DIY microscopes: [https://publiclab.org/wiki/bioindicators](https://publiclab.org/wiki/bioindicators) + Exposing test organisms to sampled water and measuring growth: [https://publiclab.org/wiki/bioassay](https://publiclab.org/wiki/bioassay) + Detecting fecal bacteria (e.g., enterococci and _E. coli_) in sewage: the common water contaminants wiki page lists a [couple ways to test for fecal bacteria](https://publiclab.org/wiki/common-water-contaminants#Fecal+Bacteria). _image here!_ #### Spectrometry methods for wastewater grab bag Lots of people at Public Lab are interested in spectrometry and have experience using spectrometers for environmental monitoring, so we’re collecting some approaches for detecting various things related to wastewater here:
## Questions Questions tagged with `question:detecting-wastewater` will appear here [questions:detecting-wastewater]
## Activities Activities tagged with `activity:detecting-wastewater` will appear here [notes:activity:detecting-wastewater]
## More resources