Tips and tricks for the Pi Builder software; see more at https://github.com/publiclab/pi-builder

Using Pi Builder, you can download a premade SD card image to use your Pi as a WiFi streaming camera, a timelapse camera, an Infragram camera, and much more! 

Read the [introductory blog post here](/notes/icarito/10-21-2018/introducing-pi-builder)

Used in the following projects:

* [Community Microscope Kit](/micro)
* [Lego Spectrometer Kit](/lego)
* [Infragram Pi Camera Kit](/wiki/raspberry-pi-infragram) (above!)

### Connecting

Once you assemble and plug in your Pi with the provided SD card (or flash your own from [one of the recipes here](https://github.com/publiclab/pi-builder/labels/recipe)):

1. wait 3-5 minutes for it to start up
2. connect to the `00-PiCamera` wifi network with password `publiclab`
3. wait for the popup prompt, or use `Click to log in to this network`, or if nothing happens, go to http://pi.local (NOT `https`, sorry!) and you'll see the welcome page. 

If this doesn't work, please post a question below!

### Video quality

The streaming video you see in the web interfaces is not the highest quality available; to change it, click `Camera settings` at the `http://pi.local/cam/` page, and change the `Wi` value to something higher like `1024`. It can in theory go as high as `1980`, but I think streaming at high framerates at this resolution is probably tough for your Pi.

[![image.png](/i/27333)](/i/27333)

## Questions

[questions:pi-builder]

****

## Activities

[activities:pi-builder]