<div class="alert">This page needs revision</div>

**Link to Kickstarter**

We are able to craft a single camera to photograph near-infrared, green, and blue light by filtering out the red light, and reading infrared in its place using a piece of carefully chosen "superblue" filter. 

##Three models

**DIY Filter Pack: **This is just a piece of "superblue" filter which you can use to turn your webcam or cheap point-and-shoot into an infrared camera. The filter allows you to take an infrared photo in the "red" channel of your camera, and a visible image in the "blue" channel. You'll also receive a white balance card and instructions on how install your filter -- it's pretty easy!

**Infragram Webcam:** This cheap but flexible reward is perfect for plugging directly into your laptop or integrating into other projects. It's also ideal for your Raspberry Pi, if you want to take it outdoors, do timelapse photography, or write scripts to control your camera. It ships as a bare circuit board with a USB cable - like an Arduino. 

**Infragram Point & Shoot:** This is the camera we designed for ourselves, a straightforward, if basic, point-and-shoot. You can simply take photos as you normally would, then upload them to our free and open-source web app to quickly and easily get a variety of composite images and analyses. To accomplish this, we're simply modifying existing cameras which we'll buy in bulk with the best specs we can reasonably get, using the "superblue" filter. This isn't an SLR or even a particularly fully featured camera -- it likely won't have an LCD screen and may be "rebranded" with a Public Lab sticker -- but it's the new filter we've put inside which counts. The final configuration will depend on the # of backers, but it will likely use AAA batteries and use a micro SD card. We're promising a minimum of 2 megapixel resolution, but should be able to do much better, especially if we get a lot of backers. Basically, the more money we raise, the better these cameras will get!