Infragram Filters

The Infragram project has used a variety of filters to make Do-It-Yourself infrared cameras, as well as infrared-visible multispectral cameras. This page is about choosing filters for different purposes. **** ## Red vs Blue Both blue and red filters are intended to block most visible light in one channel, to then use that channel for near-infrared light. This way, a single camera can be used to take simultaneous visible light and near-infrared light photos -- one in the red channel, one in the blue channel (we discard the green channel). **Most recent DIY efforts on Public Lab have focused on red filters**, but early on we used blue filters. A red filter (the most common conversion we see on Public Lab as of October 2017) results in vegetation appearing pale blue, and a blue filter typically results in vegetation appearing pale yellow. _Left: pale blue from a RED filter; Right: pale yellow from a BLUE filter. Images by @mathew and [Eclectis students]( ![](/system/images/photos/000/018/533/thumb/Rosco_26_filtered.JPG) ![]( ### Background on filter choice There's a lot of research about this choice here: [notes:red-vs-blue] **** ## Filter sources We've been using Rosco theater gels as filters, and we currently [carry the red Rosco Fire # 19 in the Public Lab store]( Red filters include: * Rosco Fire # 19 Blue filters include: * Rosco # 2007 * Rosco # 87 Also see this research on various Rosco filters: [notes:rosco] And the Rosco website: And an article on the history of Rosco filters: **** ## Exposed negative film To make a camera take **only** near-infrared photos, you can use a piece of exposed negative film as a filter. This will block most visible light (since the red, green, and blue channels are blocked) but will allow infrared light. ...

Notes on infragram-filters by jenhu

No results found; try searching for 'infragram-filters':

Search for "infragram-filters"