| Author | Comment | Last activity | Moderation | ||
|---|---|---|---|---|---|
| JSummers | "Hi Jeff, I was not aware of these technologies. Thanks for bringing them to my attention. Jack " | Read more » | over 6 years ago | |||
| warren | "Hi, Jack - this was a while ago, but lots has changed in some of these technologies. I was wondering if you'd considered using something like WebJa..." | Read more » | over 6 years ago | |||
| warren | "(sorry, i meant i see data on the link at Sparkfun) " | Read more » | almost 7 years ago | |||
| warren | "For starters, i see some data; was it working at one point and then stopped? And if so, (apologies for a dumb question) what were the things that ..." | Read more » | almost 7 years ago | |||
| warren | "Great, we have a few options. We could try to connect your Pi up for remote access instead of relaying back and forth, or you could send me your co..." | Read more » | almost 7 years ago | |||
| efuhrm | "Yes, I'm using RaspberryPi to run openpipekit, and my device is connected to the internet. " | Read more » | almost 7 years ago | |||
| warren | "Hi! sorry I missed this -- are you using a Raspberry Pi to run OpenPipeKit? If so, are you sure it's well connected to the internet? There could b..." | Read more » | almost 7 years ago | |||
| warren | "Wow, with the exception of the GPS, those are pretty impressive numbers, esp. vs a few years ago. " | Read more » | about 7 years ago | |||
| cfastie | "Those male + female headers would be really handy. This is the first time I have used a Nano without headers, and it makes a really tidy package fo..." | Read more » | about 7 years ago | |||
| warren | "May I mark this as an activity? " | Read more » | about 7 years ago | |||
| warren | "This is really great - and I love those cheap little Arduino Nanos. Do you have a list of part costs and a total cost? I'm curious if people wanted..." | Read more » | about 7 years ago | |||
| cfastie | "Hi Liz, The components wired together weigh 33 grams and the bracket weighs 8 g. The batteries to power it weigh a lot more than that. A case with ..." | Read more » | about 7 years ago | |||
| liz | "What a neat job on this Chris! How much does it weigh, including the housing? It's much smaller than 2012's "balloon board" that is still kicking a..." | Read more » | about 7 years ago | |||
| donblair | "-- a CR1220 coin cell. " | Read more » | about 8 years ago | |||
| mathew | "@donblair what battery is the coin cell battery? " | Read more » | about 8 years ago | |||
| donblair | "@pdhixenbaugh -- the latest version of the Riffle (Beta 0.1.1) will have two battery ports -- one for rechargeable Lipos, and one that can take in ..." | Read more » | over 8 years ago | |||
| pdhixenbaugh | "Would it be possible to have a variant using standard batteries? It's not too big of a deal to order a special battery, but in some places and situ..." | Read more » | over 8 years ago | |||
| donblair | "Note: fixed the broken link to the riffle datalogger, above. Cheers! " | Read more » | over 8 years ago | |||
| mathew | "re: do we need to pop the thermistor outside the cap? the smallest , most easily filled hole would be a 'vented' screw. You'd probably want a 6-..." | Read more » | over 8 years ago | |||
| mathew | "files above didn't prep for print right. Updated: riffle-blank2.zip " | Read more » | over 8 years ago | |||
| mathew | "here are some blanks for the riffle+CT board housing-- just a rectangle that is 134mm with screw holes centered in the 106mm riffle section at 65mm..." | Read more » | over 8 years ago | |||
| warren | "No, sorry - it just came on another product. " | Read more » | over 8 years ago | |||
| donblair | "@mathew -- great stuff! I really like the stud ring + nut replacement for the alligator clips. More secure, and likely available at a typical hard..." | Read more » | over 8 years ago | |||
| warren | "Just a quick note - found these sorta interesting "solderless" connectors - you just shove a wire in -- and they're surface-mount, too. I tried the..." | Read more » | over 8 years ago |