3d-printing
3d-printing


Author Comment Last activity Moderation
warren "Richard from OpenFlexure has proposed this piece, although I'm not sure it's compatible with both cameras -- https://github.com/rwb27/openflexure_m..." | Read more » over 6 years ago
warren "Just as a price reference, Thingiverse offers a kind of crowdsourced printing service and various services seem to offer about $12 as a quote for t..." | Read more » almost 7 years ago
warren "There seems to be a small piece that sits under the camera too! http://partsandcrafts.org/pi_microscope/picam2_lens_gripper.stl That would be ama..." | Read more » almost 7 years ago
cfastie "There is one part at Thingiverse. Is that the only one you need printed? The part at Thingiverse has a flat horizontal lower surface which could ca..." | Read more » almost 7 years ago
warren "I posted this on Thingiverse too! https://www.thingiverse.com/thing:2820427 " | Read more » almost 7 years ago
david_uwi "Sadly the diode array has also gone from "end of life" to obsolete to unobtainable. I'm getting the same problem with my design https://publiclab.o..." | Read more » almost 7 years ago
Karthickraj "Hi, the collimating lens and slit links are not available. Can someone please tell me the alternative links for those. Thanks in advance :) " | Read more » almost 7 years ago
BaptisteLeSergent "Hello, Like Garret said a few days ago, we can't access the hackaday website anymore. Does anyone has informations about it ? " | Read more » over 7 years ago
Garret "The links to the hackaday website are no longer functional. Does anyone know of a working website still hosting the Build Instructions? " | Read more » over 7 years ago
tekno " @TUtam, I would like to run this on an windows 10 or Ubuntu 16 " | Read more » almost 8 years ago
JSummers "Hi @TUtam, I am not entirely up on this project but am somewhat familiar with Processing and am wiling to help. I downloaded the WheeTrometer GUI ..." | Read more » over 8 years ago
abaker1617 "Hey @TUtam, sorry, but I don't think I find it. I did this project on multiple computers, and finished my work on a Microsoft computer at my colleg..." | Read more » over 8 years ago
TUtam "Hey @abaker1617 would you be willing to share your coding? Having some trouble with the processing code. " | Read more » over 8 years ago
abaker1617 "Hi, I attempted this set up in my instrumental analysis independent project. I've included a link to the pdf below. I ran into trouble when tryin..." | Read more » over 8 years ago
TUtam "Hey @bhickman, I get an error on the processing code that "The function controller(String) does not exist" on line 153 of WheeTrometer_3.0_GUI.pde ..." | Read more » over 8 years ago
JSummers "Thanks Chris, I don't expect that anyone will be making much money off of open-source science stuff. I see this as more of a service to my discipl..." | Read more » over 8 years ago
cfastie "Wow, this is a gorgeous piece of equipment. It seems to represent a huge effort in design and construction. I was pleased to learn that continuous..." | Read more » over 8 years ago
Slavik "Looking for affordable alternative of http://store.vstapps.com/collections/frontpage/products/vst-lab-cof-esp-iii-refractometer " | Read more » over 8 years ago
swkim789 "Hi bhickman, I am glad I found your site this week. Well, I should have found your inventions earlier. Quite helpful instuctions, and bill of ma..." | Read more » over 8 years ago
flatCat "@peter2975 I would not recommend using PLA filament... You can refer to the '3D Printed Part Guidlines' on the hackaday page at https://hackaday.i..." | Read more » over 9 years ago
peter2975 "Hi I am using pursa i3 printer with cura software.After printing the parts i am not getting good finish as your. I am using PLA filament can you..." | Read more » over 9 years ago
mathew "@Jimsford. you gotta print one! Shapeways could run one for you. " | Read more » over 9 years ago
jimsford "where can i get that from? " | Read more » over 9 years ago
flatCat "@peter2975 - I would imagine sheet metal would be exceedingly difficult to work in these dimensions and retain the accuracy required.. Having said ..." | Read more » over 9 years ago