Community research

warren commented on GSoC proposal: Sensor data upload and display library almost 5 years ago

I guess I'm saying in particular that moving the integration-with-plots2 step later in your sched...

warren commented on GSoC proposal: Sensor data upload and display library almost 5 years ago

And finally, I want to encourage you both to try building a completely bare-bones system first; d...

warren commented on GSoC proposal: Sensor data upload and display library almost 5 years ago

Actually, @sidntrivedi012 will also be working on a stand-alone library that plugs into a Rails a...

warren commented on GSoC proposal: Sensor data upload and display library almost 5 years ago

Hi @ishaGupta18! I wanted to be sure you and @namangupta connect about the shared parts of your ...

janajockovic47 commented on Can you give me mesure for spectrum? Thank you. almost 5 years ago

Okej,thank enyway.@Warren can you help me? uto, 7. maj 2019. 15:41 \<notifications@publiclab....

Ag8n commented on Can you give me mesure for spectrum? Thank you. almost 5 years ago

The last I knew, it took calibration to set up the wavelength. One way of doing that was with a...

janajockovic47 commented on Can you give me mesure for spectrum? Thank you. almost 5 years ago

Would you be able to read all the colors of the picture in nanometers (nm)? Than you. uto, 7. ma...

petter_mansson1 commented on Creating NDVI images with PI no ir V2 almost 5 years ago

For calibrating the Raspberry PInoIR camera I wrote a gui application to just play around with ti...

MaggPi commented on Creating NDVI images with PI no ir V2 almost 5 years ago

These are really good questions. 1) Calibration - Calibration typically involves placing known ...

Ag8n commented on Can you give me mesure for spectrum? Thank you. almost 5 years ago

Green is about 550 nm. Can you tell me the application the local people would like to use it fo...

Ag8n commented on Has anyone used a radon test kit? almost 5 years ago

Consumer reports did an evaluation of radon test kits a few years ago. Might be a good place to...

warren commented on What are the advantages to using 2 particle sensors at the same time? almost 5 years ago

This is great, thanks @kkoerner -- and interesting to see that they'll flag sensors. I wonder how...

stevie commented on Has anyone used a radon test kit? almost 5 years ago

That's neat! Thanks for the offer. I think I got most of my questions answered on that website. B...

stevie commented on Has anyone used a radon test kit? almost 5 years ago

I ordered a couple of these, they seem pretty intuitive. This website has a good bit of informati...

warren commented on Evaluating Low-cost Lead Screening Products almost 5 years ago

Hi @read_holman - just dropping some links in here after chatting! Very cool rigorous field eval...

gauravano commented on Software Community Growth through "first-timers-only" issues almost 5 years ago

Great!

rexagod commented on GSoC proposal: Mapknitter ORB Descriptor (w/ auto-stitching, pattern training, and live video support) and LDI revamp (major UI enhancements) almost 5 years ago

Referencing this here as well: https://github.com/publiclab/Leaflet.DistortableImage/issues/110#...

warren commented on Software Community Growth through "first-timers-only" issues almost 5 years ago

Added a line on the increase in "Outreachy/GSoC season"! 🙌

warren commented on Can someone clarify the colors on the simple air sensor? (turning white when plugged in) almost 5 years ago

thanks, Chris, i haven't seen any LEDs burn out yet, and we've been running them for weeks in som...

warren commented on Can someone clarify the colors on the simple air sensor? (turning white when plugged in) almost 5 years ago

Actually i just found if you force in the white connector on the side of the sensor, it's often ...

gauravano commented on PART I: How to create a relational diagram of the Public Lab database. almost 5 years ago

This is awesome Benjamin 🎉

cfastie commented on Can someone clarify the colors on the simple air sensor? (turning white when plugged in) almost 5 years ago

According to the link at your wiki the RGB LEDs are rated for 2 to 3.2 volts. Your instructions f...

rexagod commented on GSoC proposal: Mapknitter ORB Descriptor (w/ auto-stitching, pattern training, and live video support) and LDI revamp (major UI enhancements) almost 5 years ago

Hey, @justinmanley! Thank you so much for looking at my proposal, and while I did have a glance a...

bansal_sidharth2996 commented on GSoD : System diagram and Roadmap for Plots2 almost 5 years ago

https://docs.google.com/document/d/1RgF4BggVHAmJCScm7OecEFJXRmmHhVIKpMjkOjKUF1M/edit this is lin...

bansal_sidharth2996 commented on GSoD : System diagram and Roadmap for Plots2 almost 5 years ago

@warren I will like to define some of the basic terminologies I will be using in the proposal. ...

warren commented on Can someone clarify the colors on the simple air sensor? (turning white when plugged in) almost 5 years ago

The #simple-air-sensor is supposed to show red-yellow-green, but I've seen them turn white when ...

tahnok commented on easy cut delta kite plans almost 5 years ago

I did this! A friend and I spent 4 hours working through this to make a 6ft wingspan delta. In th...

MaggPi commented on Computer Vision/LED Plant Measurement System almost 5 years ago

@petter_mansson1 It has taken me a while to get up to speed on your work. There are differen...

justinmanley commented on GSoC proposal: Mapknitter ORB Descriptor (w/ auto-stitching, pattern training, and live video support) and LDI revamp (major UI enhancements) almost 5 years ago

@rexagod this is an amazing proposal. great job! +1 to @warren's inclination towards modularity....

tahnok commented on Winds aloft: and a camera too almost 5 years ago

I was thinking for that price I might be able to crack one open to harvest it for parts, or mayb...