Comments

Author Comment Last activity Moderation
ranon "This is awesome, Chris! Thanks for the great feedback! It seems I missed the nylon washers for the vinyl tube clamp for the silly putty mechanism...." | Read more » about 4 years ago
ranon "@Ecta64 that's interesting, and it makes sense that the panorama would turn out that way since the bend at the top of the pole is rotating along wi..." | Read more » about 4 years ago
ranon "That's good thinking Chris, I'll be adding a note in the instructions about the lanyard. I'll have to experiment with some plugs that might work, t..." | Read more » about 4 years ago
ranon "Thanks, Chris! I used a Fusion 360 model with the full assembly in the "wireframe with visible edges only" visual style and took screenshots, th..." | Read more » about 4 years ago
ranon "That looks good! To make the leg holes symmetrical, I've found the easiest way is to make a single hole and then mirror the "cut" command from the ..." | Read more » about 4 years ago
ranon "Here's that picture of the pendulum with the carabiner wrapped around one end: I started wrapping the line around the carabiner, which I now rea..." | Read more » about 4 years ago
ranon "The print looks great! For opening the .f3d file, there is a certain way you have to open it which I forgot to mention. Once you have made a pro..." | Read more » about 4 years ago
ranon "You're welcome, let me know how it turns out! " | Read more » about 4 years ago
ranon " I also had a chance to make some changes to the leg bracket, which I have updated in Thingiverse. The primary change I made was to the bulge in t..." | Read more » about 4 years ago
ranon "Hi Chris, Glad you've found the UDEMY course helpful! Actually, there's been a very exciting new update for Fusion that lets you directly edit .st..." | Read more » about 4 years ago
ranon "Hi Chris, Regarding the Fusion 360 tutorials, I have a former professor who recently published a free course teaching Fusion 360. Here's a link to..." | Read more » about 4 years ago
ranon "Sure thing I'll extend those as far as they'll go. Look forward to hearing how it prints! " | Read more » about 4 years ago
ranon "Thanks Chris! I designed a new leg support structure and uploaded the updated model. I designed the support structure using T-spline modeling (..." | Read more » about 4 years ago
ranon "Hey Chris, I made changes to those areas you pointed out yesterday and have uploaded a new version. Is this the sort of bulge you were referrin..." | Read more » about 4 years ago
ranon "Ok I have updated the thingiverse post and I think I've addressed all of the points you brought up, unless I misunderstood them. The leg tubes ar..." | Read more » about 4 years ago
ranon "I made a new model designed to address the layer separation issue. It is larger than the previous version, but I think the print time should actual..." | Read more » about 4 years ago
ranon "Glad to help! I have a design in mind for solving the support issue the way you're describing, I'll get back to you with that model as soon as I ge..." | Read more » about 4 years ago
ranon "@cfastie I modified the leg bracket in Fusion 360 and have posted it to thingiverse. I moved the leg brackets in more towards the center and angl..." | Read more » about 4 years ago
ranon "Thanks for the input Chris! The reason I have been using wooden dowels is for their wide availability (can be consistently found at any craft, har..." | Read more » about 4 years ago
ranon "You're welcome, glad to hear that! " | Read more » over 4 years ago
ranon "Thanks Chris! I'll reverse that nylon insert nut. Yes it does! That's one of the great features in Fusion 360, there's a plug-in that actually let..." | Read more » over 4 years ago
ranon "Hi Chris, Just made a couple changes to the Saturn V model and they should be all updated to Thingiverse. Are these the correct components and ..." | Read more » over 4 years ago
ranon "@cfastie What illustrations from this model could help you with your instructions? " | Read more » over 4 years ago